Quantcast
Jump to content

Recommended Posts

Posted

i have a 2001 quadmaster 500...it will only fire if you pull crank it...but will not with electric start...if u start it with pull crank it will run for like 5 seconds and then quits firing....has a new cdi,new battery,any help would be appreciated.....how do u check the stator?

Posted

yes..it has no spark when using electric start....but ever now and then it does....i went out and tried it 2 days ago....had spark...put plug in fired it up....didnt want to take throttle but it idled about 10 minutes..then just died...quit firing...it was doing this when i bought...guy said same thing...i brought it home..put everything together....it didnt fire...then all of a sudden it ran....that was 2 yrs ago...i put around 200 miles on it since then...now back to same thing like a wiring problem ya know

  • 6 months later...
Posted

Hey Dieseldog, what did you find out on this? My 500 is doing the same thing, I started it yesterday, idled 5 minutes or so while I was doing some other stuff and then just quit. Wont fire, plenty of gas to carb but no spark.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Popular Now

  • Similar Forum Topics

    • By realpilot
      I am unable to find a wiring diagram for this UTV.  When I turn the switch to on, the contractor does not engage.  The Brake pressure switch and the parking brake switches work correctly. What else should I be looking for?  All of the diagrams I have found are for newer models and the wire color coding is different.
       
      Thanks
    • By OldATVowner
      Just getting into this issue really. Been replacing solenoids but now I'd like to track down the problem. This time I'm not getting neutral/reverse lights or start button. Was on a creek ride when it started doing this recently. It cranks by arcing the solenoid and gives me no light or start button but if I crank with the pull cord....the neutral light and the button work. Turn it off and try to crank with the key and nothing. I'm looking into the safety switch issue tomorrow and re charging the battery. Just figured this was odd enough of a problem that you guys might be familiar. Thanks
    • By cruteg8
      Does anyone know  the orientation of the bell crank for scrambler 400 2x4 it was not hooked up when I bought quad the way  i put it high goes into reverse and vise versa I flipped it 180 but that put  the shift rod at big angle and it just kinda grinds into gears so dnt think that is right either pretty sure it has to be the exact orientation and the rod adjusted accordingly but I cant seem to find it anyone knows please help 
    • By buriedpast
      As the title says, I've got a crankcase full of fuel / oil to deal with and figure I'll just start from the top and move through the system.  Going to start with a rebuild of the petcock and then the carb if the problem isn't fixed with the petcock rebuild.  I figure I'll go with a Moose kit unless others with experience recommend another brand (All Balls, etc.)
      Any suggestions?  Thanks in advance.
    • By rjsummer
      Just picked up an 84 LT185 ATV, I understand there was an accessory add  on that gave it electric start, anyone have any info about that kit? 
×
×
  • Create New...