Quantcast
Jump to content

Recommended Posts

Posted

i am having stating issues. my electric start has stopped working. the green neutral light comes on and the red reverse light comes on. i can pull start just fine.

i would also like to find a service manual for this atv. there are alot of them out there but i don't want to pay those high prices for it.

any help would be greatly appreciated

thank you

Lee Cooper

Posted

battery is up and the only wires going to starter are the ground and one that has 2 nuts . There are no power going to the one with the nuts . Checked it with switch on and button pressed. Also have pressed button and changed gears and back to neutral also tried moving the reverse and no luck. It got dark and cant see if there any more wires go to the starter the only ones i could find are on the right side with ground on lower side and the one with the nuts on top right . It is also set in the run position .

Posted

You are right, only two wires to the starter. The hot wire is on the starter case attached with the nuts. Ground wire on a starter mount bolt.

Check your fuses next then power to your starter relay. Attached block diagram and WDM.

starter circuit.jpg

WDM KQ.pdf

57d7734bc4cd7_startercircuit.jpg.4ee5f5099f9666fbc3f252009b152586.jpg

WDM KQ.pdf

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Similar Forum Topics

    • By cavry
      O3 sat a while. Engine is running fine. I got it into neutral, did some general tune-up and cleaning then pulled the shifter pedal up and it locked up and will not release into neutral again.  Does anyone have experience with this problem?  Thanks for looking and any help.
      Cavry
    • By realpilot
      I am unable to find a wiring diagram for this UTV.  When I turn the switch to on, the contractor does not engage.  The Brake pressure switch and the parking brake switches work correctly. What else should I be looking for?  All of the diagrams I have found are for newer models and the wire color coding is different.
       
      Thanks
    • By OldATVowner
      Just getting into this issue really. Been replacing solenoids but now I'd like to track down the problem. This time I'm not getting neutral/reverse lights or start button. Was on a creek ride when it started doing this recently. It cranks by arcing the solenoid and gives me no light or start button but if I crank with the pull cord....the neutral light and the button work. Turn it off and try to crank with the key and nothing. I'm looking into the safety switch issue tomorrow and re charging the battery. Just figured this was odd enough of a problem that you guys might be familiar. Thanks
    • By Maxg_57
      Is anyone still active on this club
    • By flyinbrian365
      View File 2023 Yamaha RMAX4 Wolverine 1000 service manual
      Factory service manual
      2023 Yamaha RMAX4 Wolverine service manual
      Submitter flyinbrian365 Submitted 06/08/2026 Category Yamaha UTV  
×
×
  • Create New...