Quantcast
Jump to content

Kawasaki Brute Force 650 Backfiring through carbs and exhaust

Tubtub

By Tubtub
in Kawasaki ATV Forum

 Share

Recommended Posts

Tubtub Newbie

Tubtub

Posted
Posted

Hey all, I work for a fleet shop and we have a lifeguard ATV its a Kawasaki brute force 650. Its back firing through one carb more than the other one and back firing through the exhaust. Starts up and idles good, once you start giving it throttle it acts as if its starving for fuel. This thing gets tons of beach sand thrown at it 24/7. Things that have been replaced are:

both new carbs, new fuel pump, new plugs.

Things that have been checked: Compression is good - in range (high end of the range) also have ohm'd the coils and the resistance is within spec in the service manual. Fuel pick up is clean, no debris or restriction there. Does any body have any other ideas what it could be? Thanks for any input

  • 3 years later...
  • 2 weeks later...
  • Admin changed the title to Kawasaki Brute Force 650 Backfiring through carbs and exhaust

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Similar Forum Topics

    • realpilot
      1999 Ranger 6x6 no start
      By realpilot
      I am unable to find a wiring diagram for this UTV.  When I turn the switch to on, the contractor does not engage.  The Brake pressure switch and the parking brake switches work correctly. What else should I be looking for?  All of the diagrams I have found are for newer models and the wire color coding is different.
       
      Thanks
    • Elk
      Throttle assembly spring replacement
      By Elk
      2002 Polaris Magnum 325
      How to replace throttle assembly spring?
    • OldATVowner
      99 Bear tracker no neutral or reverse light or start button
      By OldATVowner
      Just getting into this issue really. Been replacing solenoids but now I'd like to track down the problem. This time I'm not getting neutral/reverse lights or start button. Was on a creek ride when it started doing this recently. It cranks by arcing the solenoid and gives me no light or start button but if I crank with the pull cord....the neutral light and the button work. Turn it off and try to crank with the key and nothing. I'm looking into the safety switch issue tomorrow and re charging the battery. Just figured this was odd enough of a problem that you guys might be familiar. Thanks
    • oztrax
      MY OTHER RIDE !!!!
      By oztrax
      was thinking most of us on this forum would have another ride, so to get the ball rolling...........
      MY MAX 4 6X6 2009, now this will actually go anywhere including across the water. In the 3rd photo I had gone up the river about 30 meters then climbed up the bank, 6X6 owners call it "swimming" 
      MAX 4 6X6 2008 
    • rjsummer
      Suzuki LT185 electric start question
      By rjsummer
      Just picked up an 84 LT185 ATV, I understand there was an accessory add  on that gave it electric start, anyone have any info about that kit? 

COMMUNITY SECTIONS

ATV FORUMS

QUADCRAZY MEMBERSHIP

Be a part of best online community of ATV riders and join thousands of people who love ATVs! Share your ATV photos, videos, ATV rides, get help with your ATV and more. Not a member?

SIGN UP TODAY

ADVERTISE WITH US

FOLLOW US ON

  • Automotive Webmaster
×
×
  • Create New...