Quantcast
Jump to content

Recommended Posts

Posted

I recently purchased a 99 warrior it had been sitting for a couple years. Naturally I drained the tank and pulled the carb off to clean it out. I was careful to do so, but when I took it apart a small spring fell out. There were only two springs in it, minus the throttle linkage. I know the larger one is for the accellerater pump, but don't know where the small one goes. I've looked up diagrams with no luck. It will only fit in a couple places, does it go in the fuel mix screw? Any help would be greatly appreciated thanks

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By Olchap
      Hi, I am new to  this forum and I am happy to be here.  I purchased a Yamaha 350 Big Bear without a title and I cannot find a Vin number to find out what year it is.  I am hoping someone here can help me identify this atv. I checked on the main frame near the front A-arm left side found nothing.  I checked up near the radiator and found nothing.  Where else should I look?  See image below.

    • By Rick Shropshire
      I recently picked up a  2000 warrior 350 and it doesn’t have the air filter box so I was thinking about using a clamp on filter directly on the carb.  Anyone know what I need to get or where I can find it? The one I ordered goes in the box and won’t fit directly on the carb.
    • By Need-help-with-quads
      So I picked up a 1995 Yamaha warrior a while ago and it ran decent with quite a bit of power, I was able to wheelie like nobody’s business, but I noticed that the air filter box lid had bunch of holes drilled in the top and hole in the side, also the air filter itself was serving no function and there was a huge rip in it. So I got a new air box and new filter and when I installed it, the quad lost all power and acted like it was cutting out for split seconds at full throttle. For reference I think it was running rich before because it would backfire a lot so I think it’s just restricting air flow, but how would I adjust to that because I tried leaning out the carb as much as I could but it didn’t seem to do anything unless I put the other airbox lid on with the drilled holes.
      any help would be much appreciated
      Also even when I put the old lid on, it seemed like just the new air filter gave it enough restriction that it still wouldnt run right
    • By dvs1961
      Just bought a new hisun ,been shopping for a year or more for a sxs   best bang for the buck...Are there any lift kits out there for a 2022 Hisun 750 sector ? links thanks
       
    • By afa913
      Do the small 50cc's have a way to set the speed. Im wanting to get one for my kid and i need to set it to go slow. I know the chinese knock off fourwheelers do but i dont really want one of those
×
×
  • Create New...