Quantcast
Jump to content

Latest Forum Topics

Showing topics posted in for the last 365 days.

This stream auto-updates

  1. Past hour
  2. Gwbarm
    Yes i have run into this before, aftermarket replacements usually involve both gears being replaced and they are not the same size as the OEM ones, but they mate together perfectly and do the job,i ran into this on an old machine recently if that has happened to you i would try to find the OEM gears, both, and replace them. Thats what i did took me a while and one ended up coming from Japan. The measurment would probably be different from an OEM one , if you just need to replace the race you could get the old one out measure it and should be able to find one at a bearing specialty shop.
  3. Today
  4. logray
    Hi all, I am wondering if any of you have a Clutch Starter gear from a 1988 era quadrunner 250 sitting around that you could get me a precise measurement of the outer diameter of the race the sprag engages onto, for me? I need to machine a damaged race down and install a hardened sleeve and need that measurement (it's on a different gear than the OEM one, so I can't buy and use a OEM gear).
  5. Yesterday
  6. quadnut20
    Great ride fri am about 2 1/2 hrs ! Lunch with wife 😋 garage time test of day twisted tea day 😋
  7. quadnut20
    Good game !!
  8. Admin
    Good match, Turkey pushed real hard.
  9. quadnut20
    3-2 darn !!
  10. quadnut20
    2-2 👌
  11. quadnut20
    2-1 ok we're ok 👌
  12. quadnut20
    This team is far better than I thought they would be !! 1-1 this will be a shoot out !! lol Ill need more Twisted Tea's lol !!
  13. Admin
    1-0 in 3 min… nice!
  14. quadnut20
    Me too with my Twisted Tea's LOL
  15. Admin
    I’m getting ready to watch now! Let’s go USA!
  16. quadnut20
    Go USA !!
  17. quadnut20
    LOL Got to old to ride dirt bikes ( bad knees ) Racing bikes since i was 12 !! But being a floorin installing for 45 yrs !! I raced sport quads for yrs Then had to buy 4x4 quads and the wife said i need to slow down or find a new hobby !! Golf lol No way lol
  18. quadnut20
    No thx !!
  19. Last week
  20. mehim
    Hi everyone and thanks for reading. My husband and me are getting ready to host the 2nd Quad Runners event at our nudist campground. The first one (last year) went pretty well with about 20 quads attending and have to say, it was a smaller group, but they made up for their size with the large interest in partying and there was plenty of nudity as the Saturday night went on. We have decided to host another one this summer, but we are looking for some fun (but safe) riding events. Our grounds are almost all flat and remember we are a nudist campground so many of us are bare as* naked so "slow ride" events would be the best. Give us your thoughts and ideas and feel free to ask us anything you would like, and we will answer right here in the thread. Thanks for your help and ride safe. BTW, let us know what "anything goes" means for this thread section.
  21. quadnut20
    Great Morning QC !! finishing up my work week then time to ride !!
  22. jen
    very informative....OMG makes me feel stupid!
  23. Gwbarm
    It sounds like the starter cutout relay a little black box close to the battery, lights light up when the engine is running because it doesnt go through the relay ,power is generated in the engine. Thats why the pull start works generates own power to start the engine.
  24. quadnut20
    Wow !! This would be a blast up here in Colorado to explore with !!
  25. Gwbarm
    Welcome! If you can fix cars you can fix this, although modern cars are like rolling computers, the 88 LTF not so much.
  26. geezer99
    Make sure whatever you get to tow your mower will go slow enough to not bog down the mower engine. tom
  27. geezer99
    I'd nick name it "MUD MAX" tom
  28. quadnut20
    Great Mon am QC !! start planning some ride days for later this week !!
  29. quadnut20
    Welcome from Colorado !!
  1. Load more activity


  • Recent Status Updates

    • Maxg_57

      Maxg_57

      Are people still active on this website?
      · 0 replies
    • quadnut20

      quadnut20  »  Maxg_57

      Welcome to QC from Colorado !!
      · 1 reply
    • mehim

      mehim

      hi again everyone, we completely forgot we posted in here until one of my husband's friends said he seen us in the forum. Happy to be back 
      · 0 replies
    • jeffinotown

      jeffinotown

      Hey guys and gals. I've been working on my friends 2007 big bear IRS. Unfortunately after 3 different people got their hands on it and only made things worse every time.  After months of finding just crazy problems everywhere. I'm finally at the point we're its almost 100% !!! But I'm getting a short somewhere between the 4xW switch I believe. I managed to by searching the internet like a  fiend, got my hands on an official Yamaha wire harness for the year and make. But I don't have the numbered component list and to be honest. After hours of going through and making everything so it's  easy to reference. If anyone has a picture of the referenced components. I would be forever in your debt. I've spent hours marking up the blown up diagram so it will be easy, for any possible future repairs. Please and thank you. Here's a picture of what i have so far.  Unsealed it in plastic so oil and crap won't spill or get smudged. This damn things worth it's weight in gold.              Thanks Jeff                2007 Yamaha big bear 400 IRS.       YFM40FBW
      · 2 replies
    • Zasou

      Zasou

      Who got one I can download free
      · 0 replies

  • Tell a friend

    Love QUADCRAZY? Tell a friend!

COMMUNITY SECTIONS

ATV FORUMS

QUADCRAZY MEMBERSHIP

Be a part of best online community of ATV riders and join thousands of people who love ATVs! Share your ATV photos, videos, ATV rides, get help with your ATV and more. Not a member?

SIGN UP TODAY

ADVERTISE WITH US

FOLLOW US ON

  • Automotive Webmaster
×
×
  • Create New...