Sketchy

Here's today's weird question--has anyone have any thoughts about putting a snow blade on a 87 Kawasaki bayou 300? My kid is thinking about using my bayou and I'm thinking it's too much money and time to do that. It ha to have a mount, winch, and all that goes with it.

Never mind, I got it back

Anyone know why Google play store no longer has the app for here? I even tried the "add quadcrazy to home screen" button with no success

Haven't been there yet, but several trails west of Colorado springs/woodland park area.

I set the shoes up today, enough to put drag on the drums, did another bleed, lo and behold, I have pressure at the handle. Thanks for the tips and the education.

That's one I didn't do, adjust the shoes up. I'll try that .

87 klf 300a no brake handle pressure. I've replaced the master cylinder, vacuum bled both sides and am getting clear fluid out with no air bubbles. There are no signs of fluid leaking anywhere, but still cannot get handle pressure. I pulled the hubs to check the shoes and cylinders and all looks normal. This system was dry when i bought the machine, but dont know for how long. Any suggestions to where I should look next?? I'm baffled.

Thanks, 14mm is the size of the nut--10mm threaded hole. I won't need them for a few days, tie rod ends need replaced along with brakes. Ridiculous how tight these are

I did some more digging, the best info I could find is nut size is 10×1.25 flat seat. How close am I with this info?

Heres today's silly question--what is the size of the lug nuts? I tried to pull the front wheels off and all the nuts are on so tight that they rounded off. I have a nut extractor kit coming but will need to but new lug nuts. Thanks Previous post is meant for 87 klf300a

I'll look them up, Thanks.

1987 bayou 300, klf300a, I'm having trouble finding cables for the rear brakes. Anyone have any advice? Thanks.

I've changed direction, the Chinese quad with the stuck flywheel and the bad carbs has gone to a new home. It's been replaced with a 98 artic cat 454 that runs great. Thanks for all the help on the previous project.

Appreciate it, I'll go a step at a time. I agree that they were worked on before, silicone used where gaskets should be. What's a good cleaning fluid to use?

Longchang chinese atv, little or no info available.