Search the Community
Showing results for tags 'foreman'.
-
I need some help with figuring out the issue at hand. I just picked up 2 02 Honda Foreman Rubicon 500FAs. I just did a head gasket kit on one and carb clean out. Got it all together. Put a new battery in and once I turned the key, the cluster started flashing D1, D2, ESP, and hours. I haven’t tried pull starting it but the electric start doesn’t work. I thought it might be the ECM, but I changed it with the parts quad I got and that didn’t change anything I haven’t put any other parts into it yet, but wanted to know if there is certain parts or anything I should test. Im stumped and at a loss. Im hoping I didn’t just blow 1800 on two junk quads. Please help anyone.
-
I need some help please. I just picked up two 02 Honda foreman rubicon 500s, one is for parts. I just replaced the head gaskets, but seem to not beable to get the rockers and push rods to line up and seat when I put the valve cover on. Does anyone know where I can find a service manual and/or how I can get the push rods and rockers to line up. The piston is at TDC. Thanks y’all for any help or suggestions.
-
View File 1987-1989 Honda TRX350D Foreman Service Manual 1987-1989 Honda TRX350D Foreman Service Manual Submitter Ajmboy Submitted 06/16/2022 Category Honda ATV
-
-
So we purchased a 2000 Honda Foreman 400 from a guy over a year ago for farm work. It was running well for awhile and then started billowing blue smoke about a year later (oil burning) when ever it was running, even under acceleration. So I decided to take off the cylinder and sent it to a machine shop. I am an auto mechanic by trade so was pretty easy.. Anyways, They are telling me the bore measures 91.5mm. This was sold to us as a 400. The fenders say Foreman 400. What could have been done to this? From what I have read a 400 has an 86mm bore, 450 90mm and 500 92mm. Is this correct? And how is this cylinder measuring 91.5mm? They want to bore it to the next size which would be 92mm (91.96 piston). Could a 400 be bored that much? Or was this actually a Foreman 450 engine? I am so confused right now. Maybe an aftermarket jug or engine swap? I have no idea how to tell. This is my first ATV. I never had any idling/performance issues so I assume it's jetted correctly for the 91.5mm bore? How do I check the jet size and what is recommended? Also, they are telling me the valve seals I ordered for the Foreman 400 are too small for my valves? Are the valve seals for all 3 engine sizes different sizes as well? Sorry for this long rant but I thought I had it all figured out until they told me the bore size. Any help would be appreciated. Thanks!
-
I have a 2013 Honda 500 foreman with power steering. It seems to be running hot. the high heat is radiating through the side panels down by my Knees on both sides. This is new. I am getting NO high heat warning light. The fan is coming on and off as it always has. For short periods as it always has. The unit is very clean, has never been in deep mud, no rad damage or debris. The reservoir is as it should be The rad looking from the rad cap is full The coolant has been tested and is good. Should I check if the coolant is being circulated properly HOW DO I DO This. Should I check to see if the high heat warning sensor is working as it should HOW DO I DO THIS, WHERE IS IT LOCATED Is there a thermostat that I should check? Any suggestions would be appreciated. Thanks
- 2 replies
-
- foreman 500
- foreman
-
(and 1 more)
Tagged with:
-
Not sure if this is the right place to ask this but I have. 2000 Honda Forman 450es that was my fathers. When he passed away I figured I’d put some work into it. It’s been setting a while but figured it would be a good project for me and my son Just found out that the display speedometer has been discontinued and I’m having a hard time finding one on eBay I was curious if anyone knew if any other year model would work on this bike ?
-
View File 2005-2006 Honda TRX500FE/FM/TM Fourtrax Foreman Service Manual Manual covers the following models: 2005 Honda TRX500TM FourTrax Foreman 2005 Honda TRX500FM FourTrax Foreman 2005 Honda TRX500FE FourTrax Foreman 4X4 ES 2006 Honda TRX500TM FourTrax Foreman 2006 Honda TRX500FM FourTrax Foreman 2006 Honda TRX500FE FourTrax Foreman 4X4 ES Submitter goldenroot Submitted 04/19/2020 Category Honda ATV
-
2001 Honda foreman 450s manual shift. i can shift through the gears when the ATV is off, but when I turn it on, I can shift into first, but I cannot shift to second or even back to neutral. Same with reverse. I can get it into reverse but cannot shift out. If i turn it off it will shift back fine, any idea? I just bought this and fear I got screwed over.
-
View File 1998 - 2004 Honda Foreman TRX450 Service Manual 1998 - 2004 Honda Foreman TRX450 service manual for TRX450S/FM & TRX450ES/FE I didn't see this on QC and just found it elsewhere, virus free! Submitter George Henry Submitted 09/08/2018 Category Honda ATV
-
My machine sticks in reverse until it is completely warmed up and then it shifts perfectly once it is completely warm. I have to literally yank up on the shifter to get it out of reverse. It will shift up and down fine in the forward gears just not reverse. It's a 2005 Honda Foreman TRX500FM5. I'm hoping someone can point me in the right direction. I tried searching it but didn't come up with anything. Thanks in advance. Cheers Don.
- 5 replies
-
- foreman
- foreman 500
-
(and 1 more)
Tagged with:
-
-
dumb question, I know!!!! I have a 2004 honda foreman 4 x 4 atv. There is an oil dip stick on one side and an oil hole on the other, what is it for and what kind of oil do I need.
-
-
Dear Members... can you help me with what rim is inter changeable for my Honda Foreman so I may use a street type of tire. currently I have 25x8x12 on the front and 25x10x12 on the back.... I use my foreman down in Mexico where we ride them on the streets and was wondering if I can exchange rims.... please advise and thank you for your help.. Bro. Bob