Quantcast
Jump to content

05-07-11 Pokeg

ACLakey
 Share

Recommended Posts

ACLakey Contributor

ACLakey

Posted
Posted

We took a good sized group down to the lower Klamath river canyon to look for the wild horses again, some of the wifes thought they were a myth. :) A quick picture before we headed out.

100_2292.jpg

We made several stops, this one by a nice camping spot called Fox lake

100_2293.jpg

100_2295.jpg

We moved on a little farther down the road and stopped by another spot called Griffin Lake. We found fresh horse sign, they must be close. The week prior the roads were wet with no hint of dust, this week they were a little on the nasty side. Vader all decked out.

100_2297.jpg

A quick stop for food and drinks.

100_2298.jpg

The views on the way down don't suck.

100_2299.jpg

100_2300.jpg

I lost some of the pictures from the bottom of the canyon....gremils in the camera I guess.

Splashing in the creek.

100_2307.jpg

On the way out of the canyon, on the table lands above the rim we found the horses.

100_2312.jpg

100_2314.jpg

All in all it was a great ride and a great time had by all.

ri.jpg

If folks on this site are interested in seeing more rides I would be happy to post some done in recent past.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Popular Now

  • Similar Forum Topics

    • crankin
      Starter circuit cut out relay 1997 Yamaha Big Bear 350 4x4
      By crankin
      I have a 1997 Yamaha Big Bear 350 4x4. It used to start right up. Then all of a sudden it wouldn't crank. I have a schematic for it so I started tracing the problem. I had no power at the starter solenoid. According to the schematic the power comes from the neutral switch and through the starter circuit cut out relay. I cannot locate the cut out relay on this machine.. If I apply power to the relay it will crank with the start button.
      The neutral switch is hard to get to with all the brackets on this thing. I did find out from all my research that if I apply the rear brake lever it will start.
      Does anybody know if the cut out relay exists and where it might be found?
    • harryjr
      pull rope pulls back so hard rips out of your hand
      By harryjr
      hello everybody my name is Harry jr and i recently picked up a 90's Yamaha moto4 225 i beleive and neede a starter was all he said ( i know right ) thats what they all say
      anyway i picked up a starter and installed it and when it is crankling it sounds as if it is not turning over freely as i9f there was a one way bearing not worrking correctly so pulled with recoil and it pulled back so hard i ripped out of my hand so hard it actually hurt now i have pulled and kicked a lot of bikes and such but never felt anything quite like this you can hear it try and fire and kick back but still acts as though somthing holding it back does that make any sense to anybody is it flywheel key , or valves wauyout any help would be great i picked tow of these up for $100 and tring to fix so we can ride as a family thank you in advance.
    • middlebrookgt
      2006 LT-F400F stator/generator cover change: What is the best way to check that all is good with the transfer operation before reassembling?
      By middlebrookgt
      I have replaced the cracked stator cover on my non-running 2006 LT-F400F that I purchased recently, checked all the shafts vs the service manual and pics and advice here.  I replaced missing gears, bushings and washers, made sure that truth marks were all aligned properly, that the shift cam springs felt like they returned properly, etc.  IAfter installing the new stator cover I checked the transfer lever for proper movement from L-H-R and then cranked it up.  Happily, it runs and changes gears well in L,  but it will not shift into H or R for anything.  I have opened it back up and am going back through it looking for the missing puzzle piece(s) but how can I best check that I have everything right this time before buttoning it back up?
    • SouthARriverRat
      New member from the river bottoms of Arkansas
      By SouthARriverRat
      Looking froward gaining more knowledge and seeing projects being built. Currently resurrecting some kind of Suzuki 230 quad. I believe. lol. Been sitting at the edge of the woods for 15+ years. Riding a all original 84 Honda atc 110
    • alainpp
      New to the group
      By alainpp
      I'm new to the group and the ATV world.
      I recently got a 2001 Kawasaki Lakota Sport 300 and i want to do some repairs. I want to start with the suspension and replace the bushings and joint balls.
      Where can I get the service manual in PDF format?
      Thanks.

COMMUNITY SECTIONS

ATV FORUMS

QUADCRAZY MEMBERSHIP

Be a part of best online community of ATV riders and join thousands of people who love ATVs! Share your ATV photos, videos, ATV rides, get help with your ATV and more. Not a member?

SIGN UP TODAY

ADVERTISE WITH US

FOLLOW US ON

  • Automotive Webmaster
×
×
  • Create New...