Quantcast
Jump to content

Recommended Posts

Posted (edited)

For the time being I'm gonna have to let the old 4x4 sit out back next to my garage. But I'm not too happy with it just sitting out in the open and I'm wondering what would be a good way to deter thieves. First it'll be covered of course from top to bottom. Second I guess I'll be digging big a** hole and filling it with probably around 500lbs of concrete with a giant 1" diameter loop of rod sticking out the top. It'll actually be a huge U-bolt clamp I'll get from a local fastener company. Using this I'll try to physically secure it looping some hardened chain through what part of the atv I don't know.

Only other idea (which is a bit far fetched I'll admit) is to hook up some kind of alarm system by way of a cable like you see sometimes on store merchandise out for display. I assume it would be hooked up to a loud speaker. Again I know this one is going somewhat overboard but considering how easily the quad could be jacked it might be the one deterrent that keeps it safe.

Open to your suggestions

PS. Don't really live in a bad neighborhood but the neighborhood kids are through my back yard all the time especially at night...thus the need for security.

Edited by toonces

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By Atomusthenes
      I would appreciate being pointing in the correct direction for a wiring diagram and or schematics of the 88 Honda FourTrax 300 4x4 if anybody has any knowledge of how to test the ignition system stator and CDI I don't know if the voltage regulator probably and also the FCU I put a new ignition in it it is a cheap aftermarket one doesn't have the correct plugs but has the correct wiring scheme I get power  the neutral light comes on and the oil light stays on it turns over but I have no spark
    • By BuckBilly
      Good morning to all !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
      Let's see if we can make this a daily event.
    • By kawasig
      Hello All
      I'm kinda new to ATVs. I just bought a 1987 Suzuki quad runner 230 Dual Range. I'm having a problem finding info on it. It's very clean, only 2.800 miles. The front wheels are only 30 in.center to center. I was thinking about adding wheel spacers to give it more stability. I realize the added stress on ball joints and bearings. I'm wondering if there are any other concerns? Any input is greatly appreciated!
    • By Tim Keiper
      1st problem, Does anyone know where I can find a stock carb for my Timberwolf, I have tried two different aftermarket carbs and they both suck. The machine runs great until it gets good and warm, then it keeps stalling unless I feather the throttle. it will even stall while I'm trying to go from 1st to reverse or vise versa. I took it to a buddy of mine who is a bike mechanic for years, and he told me try to find a factory carb. When I look online from dealers it says "NOT AVAILABLE" anyone have any suggestions ?
       
      2nd, The small tab on the rear axle for towing is to short for even pulling my small yard trailer, I can't even turn a little bit and hit hits. I tried making an extension which worked great as far as length, but it bends the tab and then the extension drags the ground. I have an idea of what to do to fix it, but wanted to see if anyone else has had this problem and see how you solved it.
    • By AnthonyT
      In search of my first ATV? What are good older 4x4 models?
×
×
  • Create New...