Quantcast
Jump to content

Recommended Posts

Posted

Hey All,

Looking for some recommendations on an ATV for my Daughters-in-law to ride when they visit with my sons. We ride mostly woods trails. It needs to be fairly easy to ride, automatic is't necessary but shifting should be forgiving and it needs to be under $2000. I have a Banshee and a Polaris Sportsman 500HO now.

One DIL is tiny, 5' and about 100lbs, the other is about 5'8" and 130lbs. I'm concerned that steering on the Sportsman may require too much upper body strength and the Banshee is definitely not a beginner's ride.

I'm thinking about a Warrior (may be under powered) or a Honda 400EX but I'd love to hear what others might suggest?

Thanks!

Posted

Id recommend a Kymco Mongoose.

Its a CVT tranny so you just have forward and reverse. Dang near stupid proof which is a great thing. Even a inexpierienced rider can jump on and have some safe fun.

My wife loves the mongoose.

A warrior wont be underpowered but not the best choice (IMO).

A LT230E (semi auto shift) will go anywhere (I have one of those also).

If you are really looking for a clutch machine, I leave my 250R at home to ride my 300ex when I want to just cruise. The 300ex would be a better choice than the warrior or 400ex. Again, IMO.

Too many cc + a clutch = ouch! :)

Good luck on your decision.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Popular Now

  • Similar Forum Topics

    • By Joeguy
      After i did my rebuild it seems to not want to shift well. I think the cable is alright, and when it does shift its nice and solid. I have to basically use my hand to shift and i have to pull or push it very far, like max travel, to get it to shift. I also tried adjusting the clutch set screw. Any ideas where to go next, or maybe i should just grab a new cable to try.
    • By Cj Winds
      I have a 2009 Honda Rancher TRX420FA with shifting problems.
      Usually it shifts ok when cold but after couple minutes it will stop shifting with no codes.
      The 1st shift clutch oil pressure when in first gear is 74psi. The 2nd shift clutch oil pressure when in second gear is 74psi.
      The 1st shift clutch oil pressure when in neutral is zero. The problem is when the tranny is in neutral the 2nd shift clutch pressure starts around 10-15psi and builds to 20psi. Is this normal?
    • By quadmaniac
      So here's a topic for anything goes forum and to get a way from the china virus stuff...lol. Has anyone been noticing the small drips of news about ufos and the government confirming? President Obama has an interesting late night segment. How warm and fuzzy do you feel when an ex-gov official confirms objects in the sky they can't explain...
       
    • By KIWINZ
      Hello
      My son scored a free Moto4 - late 80s from the looks of it. I don't know anything else about its history as the owner wasn't there when i picked it up. Can't see the VIN number as its a bit rusty.  He cleaned the carb and then with some either it started and still starts first pull.  Its runs really nice - not rattles etc.  Goes forwards well and the brakes work fine so it looks like a keeper, However, we have only managed to get it into reverse once.
      1) it won't shift down into what seems like where first would be - 2nd and upwards only. The changes between gears is fine.  No crunching or missed gears - just no first gear.  2nd gears appears to be as low as it will go
      2) the clutch - when you hold the gear lever up or down works (only the second ATV we have had.  Other is a Quadrunner which doesn't have this feature)
      3) no neutral light - will start when no in neutral - should it do that?
      4) the one time we did get it into reverse the neutral and then the red (reverse) lights worked. Swapped easy between forward and reverse - when it went into second, it didn't return to first or neutral
      5) checked the clutch adjust on the RHS - seemed fine to me.  When i turned the screw back 1/8 it was where it was to start with.  Clutch doesn't slip.  The bike will move forward is all gears.
       
      Any help would be appreciated
       
      Thanks
       
      Andrew
×
×
  • Create New...