Quantcast
Jump to content

LTZ 400 bogging off idle

Bigd1792

By Bigd1792
in Suzuki ATV Forum

 Share

Recommended Posts

Bigd1792 Rookie

Bigd1792

Posted
Posted

I have a 04 LTZ 400 I just picked up. It's completely stock as far as I know besides an upgraded k&n style air filter. I recently flushed all the fluids and cleaned the carb out as well as replacing the main jet o ring that was corroded and replaced the spark plug. The issue I'm having is that the bike starts right up and idles perfect and revs fine at any rpm when u hit the throttle but as soon as it's warm, if you hit the throttle quickly it will bog and sometimes die. If you gradually increase the throttle at a smooth rate it revs fine. What could be the issue?

Bigd1792 Rookie

Bigd1792

Posted
  • Author
Posted
8 hours ago, davefrombc said:

Sounds like   the accelerator  pump isn't working properly. 

Can you give me more details on this, where it's located, what it does and where I can get it? Also how difficult to replace? Thanks.

davefrombc Mentor

davefrombc

Posted
Posted (edited)

Sorry ,  I  can't help  with  it, but  there  should be  lots of  information on the  net  if you search on  it ..  Bogging  on acceleration  was very  common   on cars  and utility  vehicles that  relied on accelerator  pumps to momentarily  enrich the  mixture  when  the throttle  was  opened quickly. The accelerator  pump  will  be  a  part of the  carburettor.. it  may be operated  by the  vacuum "can"  on the Suzuki's  carb..  One  the older  cars and  carbs on some  ATVs it was an actual  plunger in a "tube"  in the  carb  that  gave a  small  shot of  gas when the  throttle  was opened ..  on other  carbs , it  is a  needle  valve that   is opened   by the  movement  of the  throttle  or  a vacuum can.

Fortunately  I  haven't had to  get into the  carbs or ignition/  electrical  systems on my  quad  (Honda) or  my  friends Suzuki, so  I  can't give you  first  hand advice  on  working on them.  I  can  only  give  you  a  clue  where  to  look  for a possible  solution to the problem.

Edited by davefrombc
Fixed a typo and omission
wildthang Apprentice

wildthang

Posted
Posted

I can't say for sure which parts on your carb are bad. Problem could be caused by something else as well. What I would do would be tear the carb off and check the accelerator pump out. It might just need the diaphragm, but you won't know until you look at it. Also inspect your main diaphragm (#8) for any cracks.

  • Like 1
Bigd1792 Rookie

Bigd1792

Posted
  • Author
Posted
3 hours ago, wildthang said:

I can't say for sure which parts on your carb are bad. Problem could be caused by something else as well. What I would do would be tear the carb off and check the accelerator pump out. It might just need the diaphragm, but you won't know until you look at it. Also inspect your main diaphragm (#8) for any cracks.

I'll do that, thanks again!!

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Similar Forum Topics

    • Mikey509
      oil for air filter?
      By Mikey509
      Hi everyone, first and foremost, I want to thank everyone for all the help I've received. I am so glad I found this community. I also wanna apologize if I'm spamming the forum, I come up with questions as I go, I guess lol. So when I got my Recon, the air box was missing the lid, held together by zip ties, and the filter was ripped and nasty. I have since ordered a new air box assembly. It comes with everything: the box,  lid, and filter ( the insert and the foam), and all the hardware necessary. This is the first time I've seen a metal filter inside a foam filter lol. However, my question is, I have read that you have to oil these filters? Every time I read it, it was always skimmed over, and I could not remember where I had read it. Is there a certain oil needed for this? Is the filter washable and reusable? Do I just stick the filter in oil, lol? Sorry if it sounds like a dumb question. Thanks in advance, y'all!
    • kevinohio
      1998 Suzuki Quad Runner LTF500F Air Filter Box Help ?
      By kevinohio
      When I bought my atv.its missing the air filter.on the parts diagram.it shows the air filter cage separate.but in my air filter box.it looks like it has an air filter cage fastened to air filter box.do I need a air filter cage on top of piece in air box.
       
    • Gwbarm
      Replacing Tires on ATV
      By Gwbarm
      I have had my new tires for a while, chronic procrastinator, decided it was time to get them mounted up. Against my better judgement i decided to mount them myself.
       

      I got one of these Harbour Freight manual tire mounting machines, mounted it to a half pallet to make it more portable. Very impressed with the quality and amount of tools that came in the kit for a low price point.
       

      The bead breaker worked very well, i wasnt sure it would be able to do it, i think these tires are original to the bike its a 2004, but with enough lube, mothers concentrated car wash straight, it finally broke the bead.
       

      Tire fit very well on the machine and it tightened down good.
       

      The extra long pry bar that came with the kit worked well to get the outer rim of tire off.
       

      Half way there, half way there no issues, then it got serious.
       

      I pulled and i tugged had 3 prybars working this thing and it wouldnt budge no matter what i tried it would not come off, until i got the grinder out and cut it off. Im sure most of you see what the problem was. I didnt notice it until i was too far in to change direction. On this particular rim the tire goes on and off from the back side of the rim, not the front like what i was used to. The back side is the low side. Plus to add to the problem tires were old and not very strechy, i have a greater respect for how well these ATV tires are made with well reinforced sidewalls, even with the grinder it took me a minute or two to cut through it, of couse i was being very careful not to nick the rim. Anyway the HF machine worked well and the tire is off, hopefully the next one wont be this bad. Lot of hard work for an old man, glad i can still do it.
       

      Now for the fun part , cleaning up the old rim, years of stop leak and slime caked on the inside, that stuff dries hard, the little Milwaukee is good for getting into tight spaces, but wasnt quite up to the task.
       

      Needed a few more RPMs.

      Old rattlecan paint just flaked right off. Now time to decide on a new color, tired of the boring gray. More to come!
    • Rick Shropshire
      Warrior 350 air filter mod
      By Rick Shropshire
      I recently picked up a  2000 warrior 350 and it doesn’t have the air filter box so I was thinking about using a clamp on filter directly on the carb.  Anyone know what I need to get or where I can find it? The one I ordered goes in the box and won’t fit directly on the carb.
    • Motorgod0
      Question on fluids
      By Motorgod0
      Hello. New guy here. First time 4 wheeler owner. This may have been discussed somewhere but I can’t seem to put in the right words to do a proper search. Hoping someone can help. I have a 2000 Yamaha big bear 400 2WD. There is what appears to be an oil fill hole next to the pull cord. The cap has no dipstick.  What fluid goes in that and how do I drain it? 
      *the other side has a dipstick for the oil. I don’t want to put something in that could cause an issue. Thanks in advance. 

COMMUNITY SECTIONS

ATV FORUMS

QUADCRAZY MEMBERSHIP

Be a part of best online community of ATV riders and join thousands of people who love ATVs! Share your ATV photos, videos, ATV rides, get help with your ATV and more. Not a member?

SIGN UP TODAY

ADVERTISE WITH US

FOLLOW US ON

  • Automotive Webmaster
×
×
  • Create New...