Quantcast
Jump to content


Looking for a Service Manual? Download Now! ×

CDI HELP NEEDED!!!

Mocnyang

By Mocnyang
in General ATV Discussion

 Share

Recommended Posts

Mocnyang Rookie

Mocnyang

Posted
Posted

Hi... new to forum first post, have a 2005 raptor 350 and 84 atc200es and just picked up a 2001 yamaha big bear 400 2wd. It was only $500 so i bought it knowing there was no spark. Well to start i tested everything by the book fuses, kill switch, main switch, neutral switch, parking brake switch, ignition coil, pickup coil, dirction coil, stator and all of the connections in between soooo......i need a cdi problem is I can't find a cdi anywhere, searched by part number model also searched possible interchangables, no dice. It's part number is 5fu-00 F8T36471 9910. Any help on if i can use another model or where i can possible find a replacement. Not sure if this helps but it has a 8 pin and 6 pin connector. Thanks in advance for any answers  I'm stumped.

Link to comment
Share on other sites
Mocnyang Rookie

Mocnyang

Posted
  • Author
Posted

Yea I found those after I posted this. The funny thing though is the one that I have is actually as 2000 on a 01...odd.  I'm going to my local parts shop tomorrow to see if the have anything. Even if it's a little more money I'll buy it instead of going through those types of sites. The review a just horrible. Thanks for the quick reply.

Link to comment
Share on other sites
Mocnyang Rookie

Mocnyang

Posted
  • Author
Posted

So I bought one through a dealer in California, they had the best price. Genuine yamaha part not a aftermarket. Plugged it up and a it fired right up. When it started I heard the flywheel hitting the pickup coil so I had to take it apart again but I just tipped it on its side. Not all the way, I leaned it against something so I didn't have to drain the oil.

 

Sure enough there was a nick on the pickup coil but it still worked fine so I loosened it, pushed it back fully which was only 1/16th or so. Put it all back together and it was good to go.

 

Thanks for the help all!!!!

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Forum Topics

    • Spritee1
      2006 polaris sportsman 500 ho issues with the unit like the belt is slipping
      By Spritee1
      having an issue with the unit when running under a load up a hill or in high gear, seems like the belt is slipping, there is a clapping sound coming from the primary clutch like it releases and snaps back in. i don't think I should have a noise like that. this is a friends unit and he has already replaced the primary twice with the same result.
      not sure where to look next
    • newguy024
      New to atvs
      By newguy024
      Just got into ATV riding just last week, never had much money so i couldnt afford to buy anthing, so now at the age of 34 i just bought a 1987 suzuki quadrunner 300 for 500$ took it out a few times and what a rush of excitement to go through that first mudhole haha!
    • justent_88
      94 Kawasaki Mojave 250 - No spark, Very confused
      By justent_88
      Hello, im looking for some input on this situation i have. My 94 Mojave has no spark, and i have no idea what it is. Ive replaced/tested the magneto, the pickup coil, cdi, the ignition coil. Even the key and Killswitch. I haven't tested the harness its self, but i have tried another harness and still nothing. The only thing i can think of is the fly wheel itself. I have found a lot of metal shavings in the fly wheel and have cleaned it the best I could. But nothing happened afterwards. I am truly stumped here and hoping some of yous could shed some knowledge/ideas that could help get this thing to fire. 
    • HSTAR
      1997 Yamaha big bear 350 Shift shaft issue
      By HSTAR
      Hey I have a 1997 big bear 350 4x4
      I replaced the shifter shaft and the shift arm linkage and the rod when I installed them all I was unaware that you had to line the dot on the shifter shaft with the gap on the linkage arm gap put it all back  together and rode it I can't get it to shift in the right gears  I can move the shift cam by hand and goes in different gears but with the shifter shaft in it riding I can't put it in R or N 
      Anyone know how to line up the shifter shaft and the shift cam s
       
    • ResQ91
      1987 Yamaha Big Bear Electrical Troubleshoot
      By ResQ91
      Hi guys
      My 87 Bear 350 won't start and could use a hand.
      Turn key on and Oil light turns on and then slowly fades out. (I think this is key to this) No start, not even a tick.
      battery and connections good
      A Solenoid post jump turns it over
      Neutral Safety Switch wire attached and seems good
      It has not had a wire/switch on Rear Brake Pedal ever since I had it.
      Any thoughts on some other things to troubleshoot this??

COMMUNITY SECTIONS

ATV FORUMS

QUADCRAZY MEMBERSHIP

Be a part of best online community of ATV riders and join thousands of people who love ATVs! Share your ATV photos, videos, ATV rides, get help with your ATV and more. Not a member?

SIGN UP TODAY

ADVERTISE WITH US

FOLLOW US ON

  • Automotive Webmaster
×
×
  • Create New...