-
Popular Now
-
-
Similar Forum Topics
-
By HHurks
Yesterday I got a UForce 1000 as my first bike and I am wondering if there are any owners that could advise where I can find budget parts and accessories for it.
I tried looking StarknightMT, but the filtering is a bit unreliable, so direct links or exact names are much appreciated.
I'm mostly interested in sliders and side cases, but any advices for "must haves" are welcomed.
Thank you!
-
By crankin
I have a 1997 Yamaha Big Bear 350 4x4. It used to start right up. Then all of a sudden it wouldn't crank. I have a schematic for it so I started tracing the problem. I had no power at the starter solenoid. According to the schematic the power comes from the neutral switch and through the starter circuit cut out relay. I cannot locate the cut out relay on this machine.. If I apply power to the relay it will crank with the start button.
The neutral switch is hard to get to with all the brackets on this thing. I did find out from all my research that if I apply the rear brake lever it will start.
Does anybody know if the cut out relay exists and where it might be found?
-
By Arizona
Just recently bought a dead 06 Eiger, Can someone post or send me a wiring diagram for it:?
Need to check all wires, no power in most places, Cant seem to read the ones from online manual,
too blury and cant tell wire color. Just too small. Thanks Az
-
By toe420
Hey everyone, I just picked up a 91 trx350 4x4 with a blown top end. I don't know what happened to the poor thing but the cam journals that were round are oval shaped now. I also bought a running engine from a 92 trx350 4x4 to swap into the 91. Is there anything in particular I should be checking while the engine is out and I have good access to it and the frame?
-
By ATVcenter
Hey everyone,
I'm seriously considering a CFMOTO 600 Touring but keep hearing mixed feedback about parts and dealer support depending on where you live.
Before I pull the trigger, I'd love to hear from actual owners:
- How long do parts usually take if your dealer doesn't stock them?
- Have you had any warranty work done? Was it smooth or a headache?
- Does your dealer provide decent service, or are you stuck doing everything yourself?
The value proposition is hard to ignore - seems like you get 30% more features for the money compared to the Big 3. But I'm trying to figure out if the potential service headaches are worth the upfront savings.
Would love to hear real-world experiences, especially from owners 2+ years in. What should a potential buyer know before committing?
-
COMMUNITY SECTIONS
ATV FORUMS
QUADCRAZY MEMBERSHIP
Be a part of best online community of ATV riders and join thousands of people who love ATVs! Share your ATV photos, videos, ATV rides, get help with your ATV and more. Not a member?
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.