Quantcast
Jump to content


2017 Polaris Industries RANGER CREW XP 1000


Recommended Posts

Engine

Engine Type
4-Stroke Twin Cylinder
Displacement
999cc
Cooling
Liquid
Fuel System
Electronic Fuel Injection

Chassis

Front Suspension
Dual A-Arm 8.0" (20.3 cm) Travel
Front Brakes
4-Wheel Hydraulic Disc with Dual-Bore Front and Rear Calipers
Front Tire
28 x 9.5-14; Outlaw 2
Rear Suspension
Dual A-Arm, IRS 8.8" (22.4 cm) Travel
Rear Brakes
4-Wheel Hydraulic Disc with Dual-Bore Front and Rear Calipers
Rear Tire
28 x 11-14; Outlaw 2

Dimensions

Dry Weight
1587 lb (720 kg) EPS model
Wheelbase
113 in. (287 cm)
Ground Clearance
12.8 in. (32.5 cm)
Fuel Capacity
10 gal (37.9 L)
Rack Capacity
1,000 lb (453.6 kg)
Towing Capacity
2,000 lb (907.2 kg)

Transmission

Transmission
Automatic PVT H/L/N/R/P; Shaft
Drive System
Pro-Lock On-Demand AWD/2WD/VersaTrac Turf Mode

General

Colors
High Lifter Edition Titanium Matte Metallic
 
 
Price: $14500
 
contact us : unizone2014 at gmail dot com
 
skype: heyman132

5.JPG

6.JPG

7.JPG

  • Like 1
Link to comment
Share on other sites

  • 2 months later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By Gwbarm
      I generally use Non Ethynol fuel in all my small engines. I just got back from the gas station and that fuel has really increased in price since last year, I will continue to use it, even though its north of 1.00 a gallon more. That seems minor compared to cleaning and repairing carbs every year. 
      I was just curious as to what others are doing in regard to gas in their quads, i know a lot of the newer ones are fuel injected which shouldnt pose a problem, but i have had lots of problems with rust and jell forming in carbs when using ethynol fuel.
    • By semicolon
      Hi, I am having issues with my TRX350D fuel pump.  It suddenly stopped running so I have replaced all the fuses and cleaned all the terminals.  I have fitted a new pump, fuel cut-off relay and rectifier.  Still nothing!!  The pump runs when attached to a battery.  The engine will start on the choke and the filter fills with fuel but it will  not rev and dies when the choke is closed. I have power to the relay but nothing at the pump black/white wire when cranking the engine.  Any ideas where to go from here would be very much appreciated!!
       
    • By jatho
      What is the best engine oil to use for the Suzuki King Quad - also any other tips and tricks I should know before doing an oil change on these bikes 
    • By bighoss
      i got my son new outlaw 50 a few weeks ago and we went rideing yesterday and while we were riding it died and it took me like 10 min to get started back and it died agen when we got close to truck so i pulled it back took the plug out it looked like it was drop in a bucket of gas took the air filter out and the ait box was full of gas also got home it started rite up today i started it it starter up but was blowing what look like water out of the exholst let it idel for a lil bit did not die but as soon as hit the gas and let off it will die what does that sound like i thnk i going to take it back to dealer and tell them to fix it as it is under warrenty but would like to know what it could be first
    • By Topendcol
      First issue was fuel pump wont start once ignition has been turned on. Replaced the pump as I had one on hand, than noticed no power so replaced the fuel pump relay as that was were i traced the power to. Still nothing so further inspection looks like signal is coming from the PCM (FLR B20) but not switching the the brown wire to the fuel pump. Ive checked the operation of the bank angle sensor and it appears operational. Fuses and wiring all appear OK. The engine stop relay also tests OK. Ive been through the repair manual and diagrams but to no avail. Fully stumped, any tips would be helpful. Thanks
      Col
×
×
  • Create New...