Quantcast
Jump to content

Recommended Posts

Posted

I'm looking at both of these ATV's they are both in good condition.  I'll mainly be using them to pull around my utility trailer around my yard, as well as moving my boat in and out of my storage shed.  With both in the same condition what would make you buy one over the other? 

Thanks

Posted
1 minute ago, Darrinster said:

So far the 1987 Big Bear I bought was worth the money. Hope to have it for a long time.

I was going to say 1995 big bear which you have in the topic title because it's newer but you just updated the topic with a 1987 big bear. So it's a 1987?

Posted
1 minute ago, Ajmboy said:

I was going to say 1995 big bear which you have in the topic title because it's newer but you just updated the topic with a 1987 big bear. So it's a 1987?

My Big Bear is an 1987 I don't think they changed much.

Posted

I didn't update the title, I was looking at a 1995 big bear 350 or a 1987 honda 350D.  But now I found a 2000 yamaha Kodiak 400. For a little more than the big bear.  So I might go that route instead.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Similar Forum Topics

    • By WeeBee
      I'm looking at buying a New "CarryOn" 5'x8' Trailer with the Ramp Gate and Mesh Floor from my local Tractor Supply store ! Anyone have any experience with this Brand of trailer to share ?? Thanks!
    • By kellogs
      Hello,

      Pondering on what would be better in terms of practicality vs. money spent. The ATV will be a small 125 cc Chinese brand that can be fully contained in a small euro-van (VW Caddy)

      1. Load the ATV on a trailer while riding it.
      Need to buy the ATV + hook + trailer (+ ramp?) and work on the car to mount the tow hook, of course.
      Perhaps I can find a trailer than can do this -
        Side question: what sort of mechanism that allows such loading is that, or, in other words, what sort of trailer am I looking for ?

      2. Load the ATV inside the mini-van.
      Need to buy the ATV + ramp.
      Also need to push it inside as riding it won't be possible. The thing will weight some 100 kilos, about 1.5 times my body weight. I shall go for the longest ramps that will fit into the van, but still, not sure I can push it in and pull it out of the van without cursing my life - if at all doable.

      What do you guys think ?
    • By jay41198
      I am missing a cdi box for my 1988 Suzuki quadrunner LT 4WD is there a rplacement box that i can wire into this bike to get it back running beings that the cdi box is no longer made 
    • By mehim
      Hi everyone and thanks for reading. 
      My husband and me are getting ready to host the 2nd Quad Runners event at our nudist campground. The first one (last year) went pretty well with about 20 quads attending and have to say, it was a smaller group, but they made up for their size with the large interest in partying and there was plenty of nudity as the Saturday night went on. 
      We have decided to host another one this summer, but we are looking for some fun (but safe) riding events. Our grounds are almost all flat and remember we are a nudist campground so many of us are bare as* naked so "slow ride" events would be the best. 
      Give us your thoughts and ideas and feel free to ask us anything you would like, and we will answer right here in the thread. 
      Thanks for your help and ride safe. 
      BTW, let us know what "anything goes" means for this thread section. 

    • By logray
      Hi all, 

      I am wondering if any of you have a Clutch Starter gear from a 1988 era quadrunner 250 sitting around that you could get me a precise measurement of the outer diameter of the race the sprag engages onto, for me? I need to machine a damaged race down and install a hardened sleeve and need that measurement (it's on a different gear than the OEM one, so I can't buy and use a OEM gear). 

×
×
  • Create New...