Quantcast
Jump to content

  • Do you own an ATV? Join our Forum!

    As a member, you can post in our forums, upload your photos and videos, use and contribute to our downloads, create your own member page, add your ATV events, and even start your own ATV club to host your own club forum and gallery.  Registration is fast and you can even login with social network accounts to sync your profiles and content.

DavidMe

Yamaha ATV Servo

Recommended Posts

What's someone's thoughts on replacing servo motor and not the whole thing? I've removed servo housing and removed motor but don't want to buy just the motor if its better to replace the whole thing.

Thanks

Share this post


Link to post
Share on other sites


I would recommend replacing the motor vs the complete assembly. The Yamaha OEM assembly is a quality assembly and unless it's cracked or busted, I would keep it as long as possible. The motor is an easy install and much cheaper than the whole assembly. Once you replace the motor, you'll basically have a new assembly. Here is the link to the motors. 

http://www.501parts.com/product/5km-5gh-yamaha-replacement-servo-motor/

Share this post


Link to post
Share on other sites

@DavidMe what year, make, and model is your ATV? I changed your topic to Yamaha ATV Servo for now, but once you share your ATV info, we'll update it to be more descriptive. Thanks. 

Share this post


Link to post
Share on other sites

Its a 2006 Kodiak 450

Oleblue, that's what I did. Figured I had it off and apart and that was the cheaper route to go. The atv isn't in the best shape so didn't want to sink a bunch of money in it. I appreciate the input. Thanks

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Topics

    • By dctaz37
      Hello, the ATV doesn't stop anymore so I guess it is time to replace the brakes. Looking for part number and instructions. I think it may have shoes front + back and the front would be hydraulic. 
    • By basmn
      A friend has a 07 trx 400ex..the engine drain bolt housing has a couple of cracks where the drain bolt threads in and is leaking oil...a one had any luck sealing this area with JB weld or something similar ?
    • By cheatmaster300
      I purchased a quad with engine problems. The previous owner had pulled the motor and pulled the valve cover but decided to stop. I have done Arctic Cat top ends before but have never worked on the bottom end so any advise would be appreciated. What I have found so far is the connecting rod bearing is completely gone and some scoring on the jug walls. What i'm wondering is if anybody here has worked on these and if so did you replace all the bearings or just the ones that were for sure bad? Also is the 2006 Suzuki King Quad 700 motor exactly the same? It seems Suzuki parts are a lot cheaper to buy.
    • By Admin
      Yamaha Australia has announced it will discontinue selling Utility ATVs due to new Australian government legislation that requires the mandatory fitment of so-called Operator Protective Devices (OPDs), YMA will not sell utility ATVs after the government compliance deadline of 11 October 2021.
      “The decision to make the fitment of OPDs compulsory is disappointing. The ruling has forced us to withdraw utility ATVs from the Australian market because as a manufacturer we are not willing to gamble with our customers lives by bolting untested devices onto our specifically engineered and designed ATVs,” explains YMA Director Brad Ryan.
      As the market leader in this segment, Yamaha recognises that utility ATVs are an important part of farm operations and will comply with stage one of the new consumer legislation. This includes testing and the fitment of warning labels by Oct 2020. This will ensure that Yamaha ATVs remain available until October 2021.
      After this date customers will not be able to purchase a new Yamaha utility ATV in Australia – but sport and youth models will continue to be available. This is because new sport and fun ATVs do not need to be fitted with OPDs. In addition, side-by-side vehicles (SSVs) are not affected by this ruling, so YMA will support our utility ATV dealers and ease the transition from ATV to AG bike and SSV business.
      “Fortunately, our utility ATV customers can transition to our equally capable lineup of AG bikes and expanding SSV range,” adds YMA Director Brad Ryan.
      Customer safety has always been our priority. YMA has provided market leading rider training and promoted proven safety methods. YMA also helped develop the Shark ATV helmet which is the only fully certified farm safe ATV helmet available. YMA feels so strongly about customer safety that purchasers of new Yamaha utility vehicles will receive a free Shark farm safe helmet valued at $250 while stocks last.
      YMA is also fully committed to customer care via a national dealer network that will continue to service ATVs and with the supply of parts and accessories into the future.
      Source: https://www.dirtaction.com.au/yma-to-discontinue-utility-atvs/
    • By MarkinAR
      And the new 300FW is already wounded. Something got in a bind and blew the whole chunk of case out around the primary drive gear at the back of the motor. In the pic you can see the crack along the top...there is a big chunk missing from the bottom. And it won't roll....but the front and rear diffs both seem fine. Unfortunate. This looks to be a bit of a project. Still feels like it will shift through gears so i'm wondering if the ring and pinion just jumped a bit and blew something to pieces.  I have a parts bike.  But will this require the case to be split and transmission completely disassembled?  I assume you can't just slide the broken primary drive out and slide the replacement in?
       

  • Recently Browsing   0 members

    No registered users viewing this page.


×
×
  • Create New...