Quantcast
Jump to content

2004 KFX 700 Fuel Pump Problem

Zach Jump

By Zach Jump
in Kawasaki ATV Forum

 Share

Recommended Posts

Zach Jump Newbie

Zach Jump

Posted
Posted

Hello...first post.

Have a problem I have not been able to figure out.  

While back the fuel pump went out...replaced it.  I got maybe 30 minutes..maybe less before the new one went out.

Replaced it again...same thing. Now I am sitting with two more new fuel pumps in reserve but do not want to experiment and blow out another until I have a clue of what could be wrong.

Have checked electrical...seems to be fine but I am no expert. Also the fuse is just fine.

Zach Jump Newbie

Zach Jump

Posted
  • Author
Posted

I have been trying to find something that would even tell me what voltage is wanted...with no luck.

But I will install another pump and see what readings I get.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Popular Now

  • Similar Forum Topics

    • quadcrazy
      Do you have ATV Insurance?
      By quadcrazy
      What is your take on ATV Insurance? Do you have ATV Insurance? If so, through which company and why?
      We'd like to hear our member's opinions on ATV Insurance. Please vote on the poll.
    • rjsummer
      Anyone have a Suzuki LT185 owner manual?
      By rjsummer
      I just bought a 1984 Suzuki LT185 ATV and am looking for the OWNER’S manual. ( not a service manual) 
      I contacted Suzuki Canada but they have no paper or digital copies in their archives. 
      Does anyone possibly have a digital copy they’d be willing to share? 
    • HoldenBoy
      Starter not staying engaged while cranking
      By HoldenBoy
      Hi all,
      Looking for some help on a starter/bendix issue. Can Am outlander 450 2017. While cranking to start, the starter spins and engages into the ring gear. After a few seconds the bendix retracts while still spinning and there is no damaged teeth on the drive pulley.
    • DexKing
      Recommendations for must-have tools for maintenance and repairs.
      By DexKing
      Good day everyone!
      I am pretty new to ATV/UTV/Small engine repairs and would like input on your absolute must-have specialty tools for maintenance and repairs. Aside from the obvious wrenches and sockets, what are some more specialty type tools you use for troubleshooting? I don't plan to open a repair shop or anything, I just do this as a hobby. Looking forward to your responses!
    • crankin
      Starter circuit cut out relay 1997 Yamaha Big Bear 350 4x4
      By crankin
      I have a 1997 Yamaha Big Bear 350 4x4. It used to start right up. Then all of a sudden it wouldn't crank. I have a schematic for it so I started tracing the problem. I had no power at the starter solenoid. According to the schematic the power comes from the neutral switch and through the starter circuit cut out relay. I cannot locate the cut out relay on this machine.. If I apply power to the relay it will crank with the start button.
      The neutral switch is hard to get to with all the brackets on this thing. I did find out from all my research that if I apply the rear brake lever it will start.
      Does anybody know if the cut out relay exists and where it might be found?

COMMUNITY SECTIONS

ATV FORUMS

QUADCRAZY MEMBERSHIP

Be a part of best online community of ATV riders and join thousands of people who love ATVs! Share your ATV photos, videos, ATV rides, get help with your ATV and more. Not a member?

SIGN UP TODAY

ADVERTISE WITH US

FOLLOW US ON

  • Automotive Webmaster
×
×
  • Create New...