Do you own an ATV? Join our Forum!
As a member, you can post in our forums, upload your photos and videos, use and contribute to our downloads, create your own member page, add your ATV events, and even start your own ATV club to host your own club forum and gallery. Registration is fast and you can even login with social network accounts to sync your profiles and content.
Got my Yamaha Grizzly buttoned up finally and went for a quick 2 hour ride in the power lines with my neighbor, who has a Yamaha Kodiak. We have access from his yard, which is nice. Was a beautiful day today to get out and will try to go more often. Ran into two other quad riders with a sportsman and I think grizzly. Also ran into a dirt bike rider. 😎
By John Victor
My father-in-law gave my boy a 1999 350 Big Bear. It's been sitting in a barn for a bunch of years. It runs great! My boy has been riding a couple weeks now and it has developed a squeal coming from the front end when you get off the gas at speed. No noise during acceleration. At first I thought brakes. I took it for a ride and I don't think it is the brakes. I feel it is the front prop shaft U-joints, front differential or one/both axles. I pulled the fill plug on the differential and I can't find anywhere how much gear oil should be in there. My gut says up to the fill opening. It doesn't have a manual. It's wet in there, just don't see any gear oil.
#1 Should I fill the differential with gear oil up to the fill opening?
#2 How do I check or know if the u-joints are bad? That looks like a "Big Bear" of a job if they don't need to be replaced.
#3 What else could it be? I don't think it is the front bearings. I jacked the front wheels off ground and no play in the right wheel. Very little play in the left wheel, looks like the lower control bushing is where that play is coming from. The rubber CV boots look original but all still intact. Wheels spin easily without any noise.
Thanks for any help!
i have a 91 moto 4 100. has electric start only. for as long as i could remember we have always pushed start it. after riding for while you shut it off. you are able to hit the start button and it will start right up. anyone know where i should start with fixing this issue? im fixing it up for my niece. thank you in advance.
Similar Tagged Content
Yamaha ATV manuals are located in the downloads section here at QUADCRAZY.
Please visit the downloads section at https://www.quadcrazy.com/files/
Get 15% at emanualsonline.com with coupon code EMOAFF
Get 20% at emanualsonline.com with coupon code BLAZE and $50 purchase
Clymer ATV Manual - Yamaha Raptor 700R
Damn guys its been a minute since posting here! Hows everyone doing with covid-19 floating around? I hope everyone is staying safe and washing your hands!
Its been a minute! Myself and Jon got requested to do this video only 1000 times! Eventually Finntrail started a new Blog and got some of their sponsored ATV riders make a video for them so here is ours! We got lots of parts on our Yamaha Grizzly 700 everything you see on my Yamaha Grizzly 700 you will also see on Jons Yamaha Grizzly 700. Thanks for watching and make sure you Like, Comment and Subscribe!
P.s I also said the 1992 Big Bear had a belt lol
Looking for Yamaha ATV VIN (Vehicle Identification Number) Number Decoders? Once you find your ATV VIN number off the tag on your Yamaha ATV, you can go to all kinds of websites that have VIN Decoders available. The best ones are backed by the Yamaha ATV manufacturer, however there are plenty of aftermarket Yamaha ATV VIN Decoder websites on the web. This topic will stay pinned and if you find any to add, please do it with a reply.
The following Yamaha ATV VIN Decoder websites are available where you can just enter your VIN number and it will shows you some of your ATV model details:
NICB Theft Check https://www.nicb.org/theft_and_fraud_awareness/vincheck
By Timothy Doerr, Jr
Hey y'all. I have a Yamaha ymf 250 BearTracker. I got this thing for free from people whose son tore it to hell. So it wasn't in great shape to begin with. i.e. no indicator lights (neutral light for instance), no ignition switch or key( wires were twisted together to make it run), get the picture yet?
So when it ran it ran rough and I got it running for a year or two, just something fun for the kids to ride on with me on gravels.
Now just randomly, the start button stopped working so I had to jump the solenoid, then put a temp start switch in. Kill switch would still work.
However, the thing has no spark what-so-ever. I've check continuity through the start button and it shows the contact is working, ohmed out the stator, everything is in spec, the reg/rec tested fine as well. I've replaced the solenoid on the off chance it could've been bad and the cdi unit as well, along the the little solenoid relay unit. I'm still getting no spark. The spark plugs is new as well and the coils to the plug have been tested and are good. I've tested and trouble shooted everything I can on this quad and no luck. I watched countless YouTube "no spark" situation videos and it's not helped. Does anyone have any tips or tricks I could try? Would really appreciate some input on this. Thanks!
Yamaha Australia has announced it will discontinue selling Utility ATVs due to new Australian government legislation that requires the mandatory fitment of so-called Operator Protective Devices (OPDs), YMA will not sell utility ATVs after the government compliance deadline of 11 October 2021.
“The decision to make the fitment of OPDs compulsory is disappointing. The ruling has forced us to withdraw utility ATVs from the Australian market because as a manufacturer we are not willing to gamble with our customers lives by bolting untested devices onto our specifically engineered and designed ATVs,” explains YMA Director Brad Ryan.
As the market leader in this segment, Yamaha recognises that utility ATVs are an important part of farm operations and will comply with stage one of the new consumer legislation. This includes testing and the fitment of warning labels by Oct 2020. This will ensure that Yamaha ATVs remain available until October 2021.
After this date customers will not be able to purchase a new Yamaha utility ATV in Australia – but sport and youth models will continue to be available. This is because new sport and fun ATVs do not need to be fitted with OPDs. In addition, side-by-side vehicles (SSVs) are not affected by this ruling, so YMA will support our utility ATV dealers and ease the transition from ATV to AG bike and SSV business.
“Fortunately, our utility ATV customers can transition to our equally capable lineup of AG bikes and expanding SSV range,” adds YMA Director Brad Ryan.
Customer safety has always been our priority. YMA has provided market leading rider training and promoted proven safety methods. YMA also helped develop the Shark ATV helmet which is the only fully certified farm safe ATV helmet available. YMA feels so strongly about customer safety that purchasers of new Yamaha utility vehicles will receive a free Shark farm safe helmet valued at $250 while stocks last.
YMA is also fully committed to customer care via a national dealer network that will continue to service ATVs and with the supply of parts and accessories into the future.
Recently Browsing 0 members
No registered users viewing this page.