Quantcast
Jump to content

Recommended Posts

Posted

Hello,

I recently picked up an ‘07 KFX 700. All was going well, rode it about 40 miles, when it started bogging at low speeds. If I kept the revs higher, I was just fine. Also, a persistent issue since I picked it up is the fairly difficult start (but it is abnormally cold right now and the quad is jetted for the dunes at summertime).

Regarding the complete lack of idle, I have to rev it a couple times to get it to idle after starting it, after which it’s 50/50 whether it remains idling. I don’t have low fuel, but all of this began after I rode it pretty hard and the radiator fan kicked in. Might be overheating, just wanted to hear your opinions.

Posted

Crisis averted! It was overheating. After leaving it an hour to cool it star ya just like before and idles great. Rode it around the block a couple times and everything’s in order. One question though: is this air duct (coming from the CVT) meant to be like this?

image.jpg

image.jpg

image.jpg

Posted

The duct looks fine. That engine is water cooled. Over heating is never a good thing. It really stresses the engine. Check the thermostat or the water pump. The sensor that brings the fan on could be lagging and coming on a little late as well.  
Check your coolant level and that its moving fluid through the system.  

Posted

I had a 4 wheeler a bit ago that was hard to idle, hard to start, popped at WOT after running a while...always ran great cold.  Issue on that one turned out to be trash in the bottom of the gas tank.  As you ran and disturbed the gas it would shake up the bits and clog the screen on the petcock.  After it sat a bit, the trash would fall off the petcock and it would run fine again until it stopped up again..vicious cycle.

cleaned the tank and never had an issue with it again.

Might be unrelated to your issue, but something to consider.

  • Like 2

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Popular Now

  • Similar Forum Topics

    • By Jdeaton011989
      Hi all. I have a timberwolf 250 2nd that will not start.. I thought it was out of time bc the guy I got it from said it just quit on him. The tensioner had a nut welded to it and it was like2 teeth off. I installed new tensioner and chain and it still will not start. It has fire and it will not hit off brake cleaner. It has compression. Haven't put a gauge but I'm sure it will crank and run with what it has. I double checked my work and it's still in time. Spot on. Both valves move. I'm about to put a feeler gauge on them and I'll cone back but other than that any ideas?
    • By Dutchaaron
      New to the site. Im rebuilding a Kawasaki Bayou 300. The wiring is my biggest challenge.
    • By captnunu
      Good morning, checking in from Southern Ontario, I have 3 quads. 201 Honda Forman 450S, 2007 Suzuki King quad 450 and a 2021 Polaris 570 sportsman. My wife and I do a fair amount of riding but hoping to do more this year. 
    • By toe420
      New member from BC. Anyone else from western canada? 
    • By NickPence
      Just wanted to drop a post to say hello. My name is Nick. I am from the Shenandoah Valley. Rockingham Va to be more specific. I am constantly working on junk or items i pick up from auction, mostly atvs but really about everything. My ATV knowledge is vast but find myself needing assistance regularly. 
×
×
  • Create New...