Quantcast
Jump to content

Recommended Posts

Posted

Help guys PLEASE I have an artic cat 700 mud pro 2012. I was riding it the other day and it started skipping after i shut if off that day it was the last time it would crank. it was showing codes 12 and 13 then disappeared and THEN EFI on the dash but now it's not showing. it will turn over but it will not crank. it's not getting spark either I dont believe 

  • Ajmboy changed the title to 2012 Artic Cat 700 Mud Pro No Crank
  • 1 year later...
Posted

Couple things I’d check. Inspect the plug end of the ECU connector. Clean and dry out with contact cleaner. If you have a bad connection there, try turning it over while holding the ECU in a different position. I was able to get mine to show an intermittent fault this way. Also, be sure the small red wire on the load side of the starter really has a good connection. This tells the ECU when you are cranking. Hope that helps.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Similar Forum Topics

    • By jimbo69
      my outlander 800 sometmes starts and does good ouker times starts but will not idle .any one else have same problem?
       
    • By oztrax
      was thinking most of us on this forum would have another ride, so to get the ball rolling...........
      MY MAX 4 6X6 2009, now this will actually go anywhere including across the water. In the 3rd photo I had gone up the river about 30 meters then climbed up the bank, 6X6 owners call it "swimming" 
      MAX 4 6X6 2008 
    • By Maxg_57
      How come i cant download manuals i was told this is a good spot to find one for my lt230s quadsport.
    • By quadnut20
      23 friends 5 days great weather in Wyoming riding Sand Dunes & trails !!











    • By cruteg8
      Does anyone know  the orientation of the bell crank for scrambler 400 2x4 it was not hooked up when I bought quad the way  i put it high goes into reverse and vise versa I flipped it 180 but that put  the shift rod at big angle and it just kinda grinds into gears so dnt think that is right either pretty sure it has to be the exact orientation and the rod adjusted accordingly but I cant seem to find it anyone knows please help 
×
×
  • Create New...