Quantcast
Jump to content

lightbar mount install on Outlander 570

Palooza

By Palooza
in Can-Am BRP ATV Forum

 Share

Recommended Posts

Palooza Rookie

Palooza

Posted
Posted

Headlights on my Outlander 570 are junk.  Would like to upgrade to a light bar.  What is the max size (wattage) that it can handle? 

Can I just split into the high beam wire for an install.  I see YouTube videos of a separate switch that hooks up straight to the battery, but wouldn't that drain the battery if the machine is off and lights cold be left on by accident.

I'd like to hang it from the front rack as I have a basket installed on the rack that I would like to keep there.  If anyone has done this, please send a picture!

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Forum Topics

    • vaneleus
      2014 Can AM DS90X rear brake caliper
      By vaneleus
      I've been hunting for a rebuild kit or aftermarket replacement without success. Any tips? The OEM replacement is too rich for my blood. 
    • Coyote251
      Location of rear 12V accessory plug on 2024 Outlander 700 Xmr
      By Coyote251
      I am hooking up a speaker on the rear of bike and want to use a factory auxiliary switched plug and not have to cut into the factory wiring or add another switch. I have read a bunch of posts that say there should be an auxiliary 12V connector in the front and one in the rear. I found the one in the front when I hooked up my winch but cannot find any in the rear. I have seen some pictures showing one on the right side attached to the down tube behind the side cover, but there is nothing on my 2024. Can anyone confirm that there is a auxiliary 12V connector in the rear on the 2024 700 Xmr? If so, can you please tell me where it is (with a picture if possible)?
    • Rockbottom
      Big bear 400 new stator reverse light stays on
      By Rockbottom
      Replaced stator now red reverse light stays on in all forward gears and when neutral light in on 
      When put in reverse the light goes out
      any ideas how to correct
      thanks ahead
       
       
    • kingkw
      How can I remove the tires from a 2014 Yamaha Rhino
      By kingkw
      I have a Harbor Freight tire changer. I could not get the tires off the rim.
    • HHurks
      Can am accessories?
      By HHurks
      Hey everyone, I’m in the middle of purchasing a new Can-Am and it’s been about a decade since my last bike (2007 Grizzly 700). A lot has changed! I got a new Can-Am 850 and have never had racks like these before — all I know is you buy stuff to add on to them.
      So, with that in mind, what are the “can’t-live-without” Can am accessories you run on your Can-Am ATVs for hunting? A gun boot and skid plates seem obvious, but what else do you recommend that really makes a difference?
      Thanks!
       

COMMUNITY SECTIONS

ATV FORUMS

QUADCRAZY MEMBERSHIP

Be a part of best online community of ATV riders and join thousands of people who love ATVs! Share your ATV photos, videos, ATV rides, get help with your ATV and more. Not a member?

SIGN UP TODAY

ADVERTISE WITH US

FOLLOW US ON

  • Automotive Webmaster
×
×
  • Create New...