Quantcast
Jump to content

HONDA TRX250 upgrade

tattoo2303

By tattoo2303
in General ATV Discussion

 Share

Recommended Posts

tattoo2303 Newbie

tattoo2303

Posted
Posted

hey guys got on oldy here 1985 HONDA TRX250 shes got plenty of low end id like to know if anyone has messed around and gotten a little more top end out of one???

also any personal experiances between getting new OEM plastic vs MAER replacement plastic- pros/cons this/that???

thanks

rick

Stoopidbot1 Grand Master

Stoopidbot1

Posted
Posted

So you have 2 stroke sport quad right? My buddy has an 86 and it flys. I don't know why yours wouldn't have much top end. As far as plastics, Maier makes awsome stuff. USUALLY fits know problem. All holes line up.

mywifeknowseverythin Grand Master

mywifeknowseverythin

Posted
Posted
id like to know if anyone has messed around and gotten a little more top end out of one???

also any personal experiances between getting new OEM plastic vs MAER replacement plastic- pros/cons this/that???

thanks

rick

Ummmm,,,,Yea,,,,,Push your Thumb in Farther:wink:

Do you have the 4 Trax or the 250R?

Maier is Good...There really isnt anything bad about their stuff....

tattoo2303 Newbie

tattoo2303

Posted
  • Author
Posted

nope 4 stroke, its a utility or 4trax model, i wish it was as easy as pushing harder i guess there is some more throttle there but the motor sounds like its revving quite high......i guess im just a bit nervous to push it to far

mywifeknowseverythin Grand Master

mywifeknowseverythin

Posted
Posted

To be Honest....That bike was meant to work....I wouldnt touch the motor....There really isnt any point in it....Not worth upgrades and Such.....If you want a little more Top end...Try Changing the sprockets.....That is the Cheapest/easiest way, without Ruining the Reliability, to get more Top Speed.....

Hope that helps..

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Forum Topics

    • Randel1
      Oxidized or faded plastic body parts
      By Randel1
      I recently read an article about restoring or at least improving the looks of faded and discolored plastic body parts. In the article it suggested using a 50/50 mixture of boiled linseed oil and paint thinner. You mix it up and apply it with a brush or rag to rub it in and remove the oxidation. I curious to find out if anyone has had experience with doing this and what was their short/long term results of doing so. I would hate to try it and find out that a few weeks/months down the road my plastic body parts self destruct.   
    • Atomusthenes
      88 Honda four trax 300 4x4
      By Atomusthenes
      I would appreciate being pointing in the correct direction for a wiring diagram and or schematics of the 88 Honda FourTrax 300 4x4 if anybody has any knowledge of how to test the ignition system stator and CDI I don't know if the voltage regulator probably and also the FCU I put a new ignition in it it is a cheap aftermarket one doesn't have the correct plugs but has the correct wiring scheme I get power  the neutral light comes on and the oil light stays on it turns over but I have no spark
    • Suzukiquad
      New member / quad lover
      By Suzukiquad
      Hi, I have been around everything with a motor since I was little, and finally purchased more to get my husband, and kids involved. I have 4 quads I will be searching around for information on. I have two 2002 Suzuki LT80K quads, a 1997 Yamaha Timberwolf 250, and a 1996 Kawasaki Bayou 220. I have had different ones throughout the years, and plan on buying another Yamaha Banshee. I plan on trying to learn more about all of them, so I can customize some of them. I know nothing about them besides how to race them, my dad always took care of the rest, but figured it was time for me to learn. 
    • Gwbarm
      Trail Tire Valve Replacement
      By Gwbarm
      Have you ever been on the trail and your tire valve goes bad. No way to break down the wheel and replace it. A lot of you probably know about this already i had heard of it but never used one. Just punch out the old one insert and tighten down the nut
       

       

       

       
      So far it has worked very well.
    • BuckBilly
      Where you like to ride and what riding does for you?
      By BuckBilly
      I like to ride in wooded and grassy areas. It takes my mind off the everyday routines and helps me deal with my father's cancer. Also gives me a reason to get involved with forums like this one.

COMMUNITY SECTIONS

ATV FORUMS

QUADCRAZY MEMBERSHIP

Be a part of best online community of ATV riders and join thousands of people who love ATVs! Share your ATV photos, videos, ATV rides, get help with your ATV and more. Not a member?

SIGN UP TODAY

ADVERTISE WITH US

FOLLOW US ON

  • Automotive Webmaster
×
×
  • Create New...