Quantcast
Jump to content

Recommended Posts

Posted

i got this yamaha blaster. but i need to order some parts and i dont know what year it is or engine size. 2 or 4 stroke. every site i check for vin decoding doesnt give me an answer. can someone figure it out ? JY42XJW0XJ0015282  .The guy i bought it from said its a 2 stroke. but there isnt an oil reserve tank and there is an oil fill cap on the crankcase . unless thats a trans fill .

  • 4 weeks later...
Posted

It is a 2 stroke.

Yamaha Blaster Specs

  • Engine Type: 195cc, 2-Stroke Single cylinder, Air Cooled
  • Bore x Stroke: 66mm x 57mm
  • Compression Ratio: 6.6:1
  • Carb: Mikuni 26mm
  • Ignition: CDI
  • Yamaha Blaster Horsepower: 17HP
  • Starting System: Kickstart
  • Transmission: 6-Speed Manual Clutch
  • Drive Train: 2WD Sealed O-Ring Chain
  • Yamaha Blaster Top Speed: 55 MPH
  • Suspension/Front: Independent Double Wishbone, 7.1in. w/ 5-way Preload Adjustment
  • Suspension/Rear: Swing Arm, 7.1in. and Threaded Preload Adjustment
  • Brakes/Front: Dual Hydraulic Disc
  • Brakes/Rear: Hydraulic Disc
  • Tires/Front: AT21 x 7-10
  • Tires/Rear: AT21 x 10-8
  • L x W x H: 68.3in. x 40.7in. x 40.9in.
  • Yamaha Blaster Oil Capacity: 650ml (0.67 Quarts)
  • Wheelbase: 43.3in.
  • Yamaha Blaster Seat Height: 29.1 inches
  • Ground Clearance: 4.7in.
  • Fuel Capacity: 2.4 Gallons
  • Yamaha Blaster Weight: 324 Lbs.

Using the info below, yours was manufactured in Japan in 1998. 

Step 1

Locate the VIN on your Yamaha. The VIN is typically found below the handlebars and located on the steering stem. If you do not find the VIN on the steering stem, check the vehicle frame for a small metal plate that will display the VIN.

Step 2

Decode the meaning of your Yamaha motor vehicle VIN by breaking down the unique pattern of numbers and letters. For example, if the VIN starts with "4" or a "1" then your Yamaha was made in America, a "2" stands for Canada and "3" stands for Mexico. Vehicles made in Korea, Japan, England, Germany, Italy and Brazil would have vehicle identification numbers beginning with "K", "J", "S", "W", "Z" and "9", in that order. The secondary character of the VIN reflects the motor vehicle manufacturer, which would be a letter "C" for all Yamaha motor vehicles.

Step 3

Locate the third VIN digit. This stands for the manufacturer division that produced the motor vehicle.

Step 4

Notice VIN numbers four through eight. These 5 digits reflect the features found on the motor vehicle.

Step 5

Observe the ninth figure on the VIN. This particular digit is unique and used as security to guarantee a valid VIN number.

Step 6

Look at the 10th figure of the VIN. This stands for the year of the vehicle model. From the years 1988 to 2000, the tenth VIN figure would be "J" to "Y" and thereafter the 10th figure was changed to reflect a number.

Decode the last seven figures of the VIN following these rules: the 11th digit is the plant facility where the vehicle was assembled. Digits twelve through seventeen stand for the order that the vehicles were assembled.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By docdoug72
      Has anyone had a suzuki 230 quad lock the engine up?  Its a well maintained bike, it locked up when my son was riding it. Pulled the plug, it has connected with the piston. I'm thinking the con rod let go.  I don't have a service manual.  Does the engine need to come out to check further?
    • By Randel1
      I recently read an article about restoring or at least improving the looks of faded and discolored plastic body parts. In the article it suggested using a 50/50 mixture of boiled linseed oil and paint thinner. You mix it up and apply it with a brush or rag to rub it in and remove the oxidation. I curious to find out if anyone has had experience with doing this and what was their short/long term results of doing so. I would hate to try it and find out that a few weeks/months down the road my plastic body parts self destruct.   
    • By wanrep
      View File 2019-2024 Yamaha YFZ 50 service manual
       2019-2024 Yamaha YFZ 50 service manual
      Submitter wanrep Submitted 05/04/2025 Category Yamaha ATV  
    • By wanrep
      View File 2017-2018 Yamaha YFZ 50 service manual
      2017-2018 Yamaha YFZ 50 service manual
      YFZ05YYXH
      YF05RH
      Submitter wanrep Submitted 05/04/2025 Category Yamaha ATV  
    • By kawasig
      Hello All
      I'm kinda new to ATVs. I just bought a 1987 Suzuki quad runner 230 Dual Range. I'm having a problem finding info on it. It's very clean, only 2.800 miles. The front wheels are only 30 in.center to center. I was thinking about adding wheel spacers to give it more stability. I realize the added stress on ball joints and bearings. I'm wondering if there are any other concerns? Any input is greatly appreciated!
×
×
  • Create New...