Oversized Tires - Rubbing Skid Plate

[83BMichigan]

Alright so I did some poor planning and put some oversized tires on my ATV. I ended up getting a lift which helped the rubbing at the top but in the rear specifically the tires hit the foot rest/skid plate. I removed those and will figure something out but for now I need to know if/how you all moved the plastics. 
 

For the rears, I would need the plastic to move toward the front to open more space and in the front move plastic back. 
photo attached if you have ideas. 

[Mech]

Perhaps you could heat and bend the bodywork, or make some brackets which keep it away from the tyres.. or.. last resort, cut the bodywork away so it doesn't touch.

[83BMichigan]

13 minutes ago, Mech said:

Perhaps you could heat and bend the bodywork, or make some brackets which keep it away from the tyres.. or.. last resort, cut the bodywork away so it doesn't touch.

I’d prefer not to cut it since it sits up fairly high at the touch point. I could see bending or moving the attached brackets forward so it pulls it away further from the tire. 
We just had some snow fall in michigan so I need to do something soon since I’ll be using this to plow. 

[Gwbarm]

Very nice ride I would definitely not cut it you should be able to fabricate a bracket from aluminum so it wouldn't rust and sister it to your original bracket  under the wheel well out of sight.