Quantcast
Jump to content

Recommended Posts

Posted

It was wet...

We got stuck (only once! LOL!).....

We had a ball....

_MG_5886.jpg

_MG_5888.jpg

_MG_5891.jpg

_MG_5892.jpg

_MG_5893.jpg

_MG_5894.jpg

_MG_5897.jpg

I didn't bring my camera on this ride....waiting for the others to post up their pics.....ARG! LOL!

Tom D

Posted

I just got done washing mine....and severe t-storms are forecasted...

Bleh....I'll just put an exhaust plug in the muffler and duct tape the ignition and let it get wet ;)

-TD

Posted
Hey Tom Did You Really Go In The Mud??

Looks Like Photo Shop To Me Lol

Had A Great Time Lets Do It Again Soon

John

DON'T go there!!!! LOL!!!!!!!!!!

Fun times man!

Found my airbox foam gasket hanging out from underneath the airbox

lid when I removed the seat to clean it.......I'm dreading looking in the

airbox now.....

ARG!!!!!!!

Tom D <--- Swahili for "chicken"

Posted
DON'T go there!!!! LOL!!!!!!!!!!

Fun times man!

Found my airbox foam gasket hanging out from underneath the airbox

lid when I removed the seat to clean it.......I'm dreading looking in the

airbox now.....

ARG!!!!!!!

Tom D <--- Swahili for "chicken"

i can understand why

Posted
i can understand why

Well...it took a week...but I checked the air box....

Not as horrible as I had imagined.....

Box was filled with a little gunk, but the spark arrester and

the air ducts were gunk free!!!!!

Now, just need to finish cleaning the air filter and get

some oil for it, and I'm good to go!!!!!

Woot!

-TD

Posted
Well...it took a week...but I checked the air box....

Not as horrible as I had imagined.....

Box was filled with a little gunk, but the spark arrester and

the air ducts were gunk free!!!!!

Now, just need to finish cleaning the air filter and get

some oil for it, and I'm good to go!!!!!

Woot!

-TD

well thats a relief:biggrin:

Posted
well sounds like u are allmost ready for action:yes:

Ooh rah!

I'm scheduled to race a bunch of 8 yr olds this Saturday...

I'm 150:1 to lose!

LOL!!!

-TD

Posted
maybe you will blend in!:laugh::laugh::laugh:

May you p**p your pants whilst doing wheelies!!!!!!

-TD

Posted
good luck u are going up agenst some series racers:laugh::laugh::laugh::laugh:

Don't laugh...met with a few of them the other day...

One had an artifical leg...

The other was wearing an eye-patch....

Another was missing teeth....um......yep...I'm sticking by that one....

And the last one I met had a tattoo that said, "Born To Burp"

Carry on.....

-TD

Posted
Don't laugh...met with a few of them the other day...

One had an artifical leg...

The other was wearing an eye-patch....

Another was missing teeth....um......yep...I'm sticking by that one....

And the last one I met had a tattoo that said, "Born To Burp"

Carry on.....

-TD

OH SH**!!!!!! u had better be a good rider:laugh:

Posted

I'm actually gonna put sleeping pills in their pre-race oatmeal

and prune juice in their hydration packs....

I'm such a stinker....

-TD

Posted
if i was mean i would fill the cylnder with some sand and let the cylnder wall get scratched up, or mabyee fill the cylnder (full) of gas and when the kid goes to start it BOOOOOOOOOOOM:laugh::laugh::laugh::laugh::laugh::
Posted
damn i would take the whole engine!

lol give them a shocking ride, run a wire from there plug wire and stick it somewhere where there body will be close to the meal frame and there u go they will shocked to ride there quad!!:laugh::laugh::laugh::laugh:

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Forum Topics

    • By alexwv1863
      I believe the Kawasaki is either an '03 or '04. Green automatic with shifter on the right side. Rear differential was bad, so I replaced it with another. The 4 wheeler rolled in neutral when I parked it in the shop to work on. Took old diff off and replaced it with another one. The diff I put on, turned before I put it on the bike. Once I put it on the bike, the rear end wouldn't move at all. It's like it's stuck in gear. Bike is still in neutral. I've tried rocking the bike while trying to put it in high, won't budge. Can anyone tell me of something to check or try? I haven't opened up the transmission case yet to see what's going on. What should I be looking for? 
    • By DGBear
      This thing is stuck in reverse! 2021 Axis with less than 15 hours on it. I cranked it, let it idle for a few minutes and when I put it in reverse the engine died and it won't come out of reverse gear. Any help is appreciated.
    • By JGou
      Have an axis 500 bought from Lowes.. Have had to adjust the shift linkage  1/2 doz times in the last year.. Now the UTV is stuck in neutral.. Seems to shift ok through gears but neutral light never changes, and wont move at all when running.
      Only have 13 miles on this 4x4 and have had no other problems... Any help would be greatly appreciated.. Thx,  Jay
    • By anryu451
      Rescued this thing from sitting in a warehouse the last two decades. Finally got it to fire, but when I put it into neutral to do so its now stuck in neutral, and wont shift no matter how much pushing, rocking, etc. Even with throttle it wont. Range lever on left side will go from H to L, but not to R, and this makes no difference on it being stuck in neutral.

      Any suggestions?
    • By Gwbarm
      My Yamaha Big Bear shifts through all the gears good, goes into reverse smoothly, but when i go to get out of reverse it takes a lot of effort to get it back to first gear, and even then it does not go very smoothly, have to pull up on the pedal really hard, anyone else ever had this problem. Any ideas would be greatly appreciated.    
×
×
  • Create New...