Quantcast
Jump to content

Recommended Posts

Posted

i have a 1989 honda fourtrax 300 fulltime 4x4. and im prettyy sure i need a rearend its a shaft drive. i was doing some trail riding i hit a jump and when i hit the ground i still had the throttle held. as soon as i hit i heard a bad noise, then the rearend started clicking i pulled over and took my adjustable outta my bag and ttok off the rear plug and noticed alot of metal shavings in it, it now clicks non stop and if you go up a steep hill it looses all power and wont pull its self kinda like a clutch slip but its comin from the rear some one please help me im pretty sure im gonna need a new rear end. i live in central ky some one please help asap

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Popular Now

  • Similar Forum Topics

    • By jen
      Wow...I packed a small soft side cooler with an ice pack  at -4 F and inserted my Type K thermocouple sensor inside so I could monitor the temperature without opening.  After 3 hours  the inside temperature was 60  F...OMG!   The ice pack  was solid frozen.   Standard temperature for safe storage is < 40 F.     What I found by asking was that there should be no air space in the cooler.  Packed with Ice preferably ice from connivence store (normally 0 F of less).  Food should take up  short day trip1:1 ratio.
      Good coolers are expensive.
    • By canamKID
      Anybody familiar with this noise from my quad? Just started.  It temporarily goes away when I attempt to shift into another gear but shifting has gotten harder too.
       
      Thanks
      20260711_150338.mp4
    • By Elk
      2002 Polaris Magnum 325
      How to replace throttle assembly spring?
    • By Cj Winds
      I have a 2009 Honda Rancher TRX420FA with shifting problems.
      Usually it shifts ok when cold but after couple minutes it will stop shifting with no codes.
      The 1st shift clutch oil pressure when in first gear is 74psi. The 2nd shift clutch oil pressure when in second gear is 74psi.
      The 1st shift clutch oil pressure when in neutral is zero. The problem is when the tranny is in neutral the 2nd shift clutch pressure starts around 10-15psi and builds to 20psi. Is this normal?
    • By Mikey509
      Hey guys, so I've been messing with my quad, and between all the starts, the battery is dead. Is there a certain way to charge these? Can I just throw a trickle charger on it and call it a day? can i also jump it like a normal car with a battery pack or is that to much voltage 
×
×
  • Create New...