Quantcast
Jump to content

Recommended Posts

Posted

As noted above!

I’ve been looking for quite a while now to replace my rip torn CV boots and CV shaft with the axle set up for all four corners.

I cannot find a company anywhere that sells aftermarket axles

Also, looking for a new four-wheel-drive actuator switch that bolts to the front differential mine was broken off by a large branch.

I cannot find anything but OEM parts what gives??

Again 2024 Kodiak 700 EPS.

Posted

I have run into that problem also dont seem to be many for that model Kodiak, plenty for the Grizzly, not sure why that is. I even reached out to one of the aftermarket companys and still didnt get a good answer, just not available.

  • Admin changed the title to 2014 Yamaha Kodiak Aftermarket parts?
Posted

Shortened title from 2014 Yamaha Kodiak Aftermarket parts ??? I’ve been looking for aftermarket axles and an aftermarket four-wheel-drive activator for my 2024 Yamaha Kodiak 700 EPS. Cannot find parts anywhere other than OEM ?? No, the axles are not the same as Previous years

to

2014 Yamaha Kodiak Aftermarket parts?

😁

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Popular Now

  • Similar Forum Topics

    • By HoldenBoy
      Hi all,
      Looking for some help on a starter/bendix issue. Can Am outlander 450 2017. While cranking to start, the starter spins and engages into the ring gear. After a few seconds the bendix retracts while still spinning and there is no damaged teeth on the drive pulley.
    • By kawasig
      Hello there
      I'm having a problem finding a quality carburetor for a 1993 Suzuki Quad Runner lt-f 250 2x4. I find a lot that have 3-4 star ratings. And all so far don't have the right throttle Cable inlet at the top. The last one I got 4 star on Amazon has a threaded cable sheath rest that could be partially drilled to work. I would prefer to get one I don't have to modify. Any recommendations are greatly appreciated!
    • By P_syko
      Which is more reliable? Shaft or chain drive? 
    • By Callaway
      I am trying to diagnose a no spark issue with my 02 Big Bear 400 and I am really hoping it is not a CDI.  I have done the test on the stator and I believe that is faulty.  I ordered a new aftermarket one from a the jungle website and it tested bad right out of the box so I am waiting for a different one to arrive from an ATV parts supplier.  I started looking out of curiosity at CDI units and it seems if it is for a big bear you are SOL.  Kodiaks, no problem.  Big Bear. No such luck.  
    • By Gkb
      Need ideas for all aftermarket accessories for my new atv
×
×
  • Create New...