repair 2006 Polaris Sawtooth No Spark

[LashinWheeler]

Hello all, I have a 2006 Polaris Sawtooth with no spark. It has a dead battery but with a jump pack on it, it will still not Spark. Plug is good, Throttle ETC is not closed, Stator pick up coil seems to Ohm out in the correct range, Unsure how to properly check the CDI. And when ignition is on the Neutral and reverse light come on but after cranking just the neutral stays on. 

 

Any help would be great,

 

Thanks!

[Gwbarm]

There are several checks i go through on a no spark situation. You have already done the first on my list, correct OHM range on the pickup coil. Te next is check to make sure you are getting voltage to CDI also make sure it has a good ground, check all connections going to CDI from pickup coil. Make sure you are getting 12V to the main coil and it has a good ground. Even though you r OHMs were correct on pickup coil check to make sure its putting out voltage i do that with an analogue meter digital is not sensative enough to catch the miilisecond voltage spike from the coil, unless you have a peak voltage adapter or your meter could possibly have one built in if its expensive enough mine does not so i use the analogue meter. Generally if it passes all these tests then i  replace the CDI.