Quantcast
Jump to content

Hi

hacktorious

By hacktorious
in New Members Area!

 Share

Recommended Posts

hacktorious Apprentice

hacktorious

Posted
Posted

Hi folks,

I am new to this forum and new to ATV's. I am currently doing my research and actively looking to buy a new ATV.

I am looking at the Rancher 420 4x4 and the Big Bear.

I think I am most interested in the Honda. I am planning to test ride it in the next week or so.

Also, I am looking for riders in the Northern Virginia (NOVA) area. I would be interested riding in WV, PA, MD, and VA (within about 0-3 hours of NOVA). I even travel to Western New York several times each year and would be interested in riding with people there.

southernillinoiatv Contributor

southernillinoiatv

Posted
Posted
Hi folks,

I am new to this forum and new to ATV's. I am currently doing my research and actively looking to buy a new ATV.

I am looking at the Rancher 420 4x4 and the Big Bear.

I think I am most interested in the Honda. I am planning to test ride it in the next week or so.

Also, I am looking for riders in the Northern Virginia (NOVA) area. I would be interested riding in WV, PA, MD, and VA (within about 0-3 hours of NOVA). I even travel to Western New York several times each year and would be interested in riding with people there.

I don't know how far you would be from here but check out harlan ky. we have rode there and i can tell you it's the best place i have ever road hands down. The people are so nice down there and once you unload your atv you won't need your truck ride up town to eat,get gas ice whatever not even saying anything about 7000 acres of atv park plus off park rides free yeah i said free. If you go down tell the ridge runners southernillinoiatv sent you and you will have a blast. Some of our members is going down to the fall cawll

next weekend.

http://kyoutdoors.org/forums/

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Similar Forum Topics

    • WeeBee
      Advice on ATV Trailer Brand?
      By WeeBee
      I'm looking at buying a New "CarryOn" 5'x8' Trailer with the Ramp Gate and Mesh Floor from my local Tractor Supply store ! Anyone have any experience with this Brand of trailer to share ?? Thanks!
    • Fonne
      Quad to pull flail mower - Eiger, Kodiak, Big Bear ?
      By Fonne
      Hi 
      Is looking for a quad to pull a flail mower as my first priority, but also a bit of fun. 
      So its going to be pulling a flail mower on high grass / weed on a bumpy field at pretty low speed. 
      My budget is not high, so is mostly looking at a old Yamaha Kodiak 400cc / Suzuki Eiger 400cc or similar. 
      What machine would you recommend  ?  - Really want a solid machine since I am no mechanic but can perform a early service myself. 

      (English is not my native, hope it makes sense)

    • 88bigbear
      1988 big bear 350 no spark
      By 88bigbear
      Bought a 88 big bear 350 4x4 took it for a run and lost spark, found it was stator so I replaced that then took it for a long run and it sat for 2 days and no spark again, this time stator tests good on ohms and voltage for source and pick up coils so I started replacing things including regulator, ignition, ignition coil and plug cap, spark plug and everything tests great including all safety switches until the orange wire for ignition coil from the cdi it only reads 3 volts so I replaced the cdi and still 3 volts, any ideas??
    • Cj Winds
      2009 Honda Rancher TRX420FA with shifting problems
      By Cj Winds
      I have a 2009 Honda Rancher TRX420FA with shifting problems.
      Usually it shifts ok when cold but after couple minutes it will stop shifting with no codes.
      The 1st shift clutch oil pressure when in first gear is 74psi. The 2nd shift clutch oil pressure when in second gear is 74psi.
      The 1st shift clutch oil pressure when in neutral is zero. The problem is when the tranny is in neutral the 2nd shift clutch pressure starts around 10-15psi and builds to 20psi. Is this normal?
    • cfherrman
      1988 Yamaha 350 Big bear No spark
      By cfherrman
      Fixing for a friend. Atv was at a different friends house to be fixed and he rebuilt the carb and had it running nice, then it shut off and no more. He replaced the key and the coil.
       
      So he got busy, so I am helping, I checked the wiring from the stator to the cdi, and from the cdi to the coil. All is good. I checked resistance on the pickup coil, good, and on the source coil, open. I buy a new stator (China) and the 4 prong plug only has 3 wires in it while mine has all 4. I checked resistance in the source coil and it's in the 300's. I pulled one of the old pickup wires out of the old stator and wire it in the new one. Still no spark.
       
      Why do the wires differ, I checked the VIN again and it's "J" for the year and I got a 1988 stator. Please help!

COMMUNITY SECTIONS

ATV FORUMS

QUADCRAZY MEMBERSHIP

Be a part of best online community of ATV riders and join thousands of people who love ATVs! Share your ATV photos, videos, ATV rides, get help with your ATV and more. Not a member?

SIGN UP TODAY

ADVERTISE WITH US

FOLLOW US ON

  • Automotive Webmaster
×
×
  • Create New...