-
Similar Forum Topics
-
By Machias_Mike
Hi all,
Just looking for a second opinion before I start ordering parts. It looks like from the below tests it must be a failing stator.
Background - quad runs fine but when I use winch it will drain battery, I can then pull start but even after running for 20 mins if I turn it off, battery still dead and does not seem to get charged at all. Voltage at battery after charging using trickle charger is 12.5. Start up and voltage shows 13.1 at idle, if I rev it up voltage drops to 12.5. LED lights also flicker at night even with fully charged battery. Really more annoying than anything and if it is stator I prob will not change until it becomes more of an issue or maybe during next oil change.
Thanks for looking, appreciate any replies!
Stator plug and letters show how I tested.
[ ] A [ ]
B C
[ ]
Checked resistance on stator (manual says .1 to .7)
A = .7
B = OL
C= OL
Voltage idle and 3/4 throttle
A = 31/55
B = 15/33
C = 15/32
-
By mikeexplorer
The website that has the schematics located here.
"K&T Parts House Lawn Mower Parts and Chain Saw & Trimmer Parts"
The file is large and includes a whole slew of schematics, the question is how to extract out the one you need and print it? The diagrams don't print well on a regular sheet of paper due to their size so here is a procedure to get the diagram you need and make a nice print. This will be with utilities you can get for free (the best kind
After downloading the large PDF of the schematics, go to this website here...
Tracker Software Products :: PDF-XChange Viewer, Free PDF Reader
Download pdf-xchange (its free)
Open the pdf file with this program. by clicking on the selections you can get to the exact schematic you need. Once its displayed do this:
File -> Export -> Export to Image
Select "Current page" , Image type "JPEG", choose your folder to drop the image, give it a name like "2006 400 auto" set page zoom to 100% and resolution to 300 or 400 dpi Then click export. You will now have a JPG of the page.
Next step is to go to this website...
posteriza.com - Home
Download the program (free) What this will do is allow you to tke this large JPG and break it up onto several pages. I use 4 for the schematics. Its pretty easy to follow and I print them without a border. Print them out and use an old fashioned "cut & tape" and you will now have a nice large printout of your schematic.
Mike
-
By TheJaspMan
Couple of things:
1. There are no more print copies available. We actually ran out of the first run and some people are still waiting for their copy. I am aware of who you are - no worries! However if you really want a print copy you can also purchase via self printing as well. It's a higher price and more like a paperback book. Click here for details
2. We are now also offering a copy that can be downloaded via the net for $1 each month. It is in PDF format. And should open on any machines made today with no problems.
3. Our online store is up and can be used with PayPal or mailing in payment. Our merchant account is being worked on right now to accept all forms of credit payment. Check it out! More products will start to be added right after Indy.
The store can be found here: AEM Online Store Be sure and check it out!!
-
By TheJaspMan
It’s been six months in the works, but AEM is proud to announce that the very first print edition will be released tomorrow and available to order advance copies.
What you can find in this issue, as well as future issues, are some new articles and interviews not found online. It’s full color and we are excited to share it.
The cost is $5 and you can contact us if you are interested in purchasing a copy. Contact me via [email protected] to order. We will also have an online store to purchase magazines, shirts and videos later this week.
-

Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.