Quantcast
Jump to content

Recommended Posts

Posted

ROHVA Announces Safety Rules for Safe and Responsible Use of Recreational Off-Highway Vehicles

Receives ANSI Accreditation to Develop Voluntary Vehicle Standard for this Emerging New Product Category

IRVINE, Calif., Nov 10, 2008 -- Formed by the major manufacturers and distributors to promote the safe and responsible use of a new and emerging category of recreational off-highway vehicles (ROVs), the Recreational Off-Highway Vehicle Association (ROHVA) received ANSI accreditation on November 3, 2008 to develop a standard for the equipment, configuration and performance requirements of ROVs. In addition, ROHVA has published Safety Rules for these increasingly popular off-road vehicles.

An ROV -- sometimes broadly referred to as a side-by-side or UTV -- is a motorized off-highway vehicle designed to travel on four or more non-highway tires, with a steering wheel, non-straddle seating, seat belts, an occupant protective structure, and engine displacement up to 1,000cc. Current models are designed with seats for a driver and one or more passengers. ROVs' performance and durability make them ideally suited for a variety of outdoor recreational activities as well as many work applications.

The following "ROV Safety Rules" focus on safe and responsible ROV use:

1. Always wear protective gear, use the seat belts, keep all parts of your body inside the ROV, and wear a helmet when driving the ROV for recreational purposes.

2. Never drive on public roads -- another vehicle could hit you.

3. Drive only in designated areas, at a safe speed, and use care when turning and crossing slopes.

4. Never drive under the influence of alcohol or other drugs.

5. Never drive an ROV unless you're 16 or older or have a driver's license. ROVs are not toys.

6. Never carry more passengers than the ROV is designed for, and never allow a passenger who is too small to sit in a passenger seat to ride in the ROV.

7. Read and follow the operator's manual and warning labels.

"The safety of the driver and passengers of ROVs is the top priority of the ROHVA member companies," said ROHVA Vice President Tom Yager. "ROHVA and our member companies strongly recommend that ROV drivers and passengers follow these important safety rules to avoid crashes and injuries."

ROHVA submitted its application for accreditation by the American National Standards Institute (ANSI) on June 13, 2008 and received accreditation to develop a standard for ROVs on November 3. ROHVA will manage the standards development process and make certain that the final standard is in full compliance with ANSI guidelines. An approved ANSI standard for equipment configuration and performance requirements in this emerging product category will benefit consumers.

In addition, ROHVA will serve as the primary resource for information on ROVs. To coincide with its ANSI accreditation the association has launched a website, www.rohva.org, and has published ROV Safety Rules as well as a description of this emerging vehicle category. Further specific ROV educational materials are currently under development and will be posted to the site.

ROVs offered in dealerships across the country include the Arctic Cat Prowler, Kawasaki TERYX, Polaris Ranger® and Ranger RZR, and Yamaha Rhino models.

The Recreational Off-Highway Vehicle Association (ROHVA) was formed to promote the safe and responsible use of recreational off-highway vehicles (ROVs) manufactured or distributed in North America. Based in Irvine, Calif., the not-for-profit trade association is sponsored by Arctic Cat, Honda, Kawasaki, Polaris, and Yamaha.

SOURCE: Recreational Off-Highway Vehicle Association

Recreational Off-Highway Vehicle Association

Media Relations

(949) 255-2560, Ext. 3132

More...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By Suzukiquad
      Hi, I have been around everything with a motor since I was little, and finally purchased more to get my husband, and kids involved. I have 4 quads I will be searching around for information on. I have two 2002 Suzuki LT80K quads, a 1997 Yamaha Timberwolf 250, and a 1996 Kawasaki Bayou 220. I have had different ones throughout the years, and plan on buying another Yamaha Banshee. I plan on trying to learn more about all of them, so I can customize some of them. I know nothing about them besides how to race them, my dad always took care of the rest, but figured it was time for me to learn. 
    • By Coyote251
      I'm trying to help a buddy out with his bike (he's not really on the internet or familiar with these forums) and I'll admit that I am not super familiar with the transmission and clutches in these bikes. I owned a Brute a few years ago, but never had an issue like this that I had to troubleshoot.
      So basically my buddy bought a group lot of 650's to build one good bike out of. He got it all put together and has it running but when he pushes on the throttle the clutch doesn't engage till the RPM's are quite high and even when its moving it doesn't really speed up, almost seems like its in "limp mode". He's tried 2 different transmissions so I don't think that's the problem. 
      Is there any adjustment on the clutch engagement? Anything else I can tell him to look at? Let me know if you need anymore information if you think you can help.  
    • By carkivey3
      i just picked this up. was told ran fine but overheating issues led to replacing head gasket and head. has not ran since. he is not a mechanic but helped someone else who he could not get back to finish job, got aggravated and put up for sale. i was thinking timing issues. i have 110-120psi on all 3 cylinders so i think valves are correct. dont know about distributor yet. however i have no spark. i have no power going to ignition coil. tried to follow white wire but gets lost in wire harness. does anyone have a wiring diagram? can anyone tell me what conditions have to be met before starting. motor turns over so i would think all safeties are met but you never know.
    • By JMSwed
      Hi EVERYONE
      New member here
      Bought me an old Yamaha YFM200, previously had a Big bear and a Suzuki King quad.
      Became a member to try to find useful info about the YFM200
    • By mans
      Were is the neutral safety switch on 03' Kodiak 400 4x4 . How xan i check it to see if it's good for a no neutral light no power to machine. Ty
×
×
  • Create New...