Quantcast
Jump to content

Recommended Posts

Posted

rz-udsb10.png

rz-udsb10_install.png

SSV Works now offers a complete bolt in ‘No Cutting Required’ 10” sub box with proper air space in addition to front speaker pods and even rear bed corner pods.

All SSV Works speaker pods are hand crafted fiberglass and fully enclosed to offer the best bass response and weather protection. Pods are black texture coated to match factory plastics and include mounting hardware andDo-It-Yourself instructions. See more here: http://www.ssvworks.com/media.html

RZR gen 1-3 Underdash sub box:

http://www.ssvworks.com/RZ-UDSB10.html

RZR gen 2-3 Front 6x9” speaker pods:

http://www.ssvworks.com/RZ2-FKP69.html

RZR gen 1-3 Rear 6.5” speaker pods:

http://www.ssvworks.com/RZ-RKP65.html

Website: http://www.ssvworks.com

UTV Industry News: http://www.utvguide.net/news/UTV-News.html

More...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Popular Now

  • Similar Forum Topics

    • By TomJulio
      Looking for two stock front wheels for 92 TRX300 2WD.   I think they are 6 x11" size.     
    • By TomJulio
      I recently noticed my Fourtrax 2WD has 4WD wheels installed on the front.  The back spacing is significantly different than 2WD wheels and they are almost touching the strut springs and the tires actually do touch the springs..   So far, no luck locating 2WD wheels to correct this issue. 
    • By Olchap
      Hi, I am new to this forum I am currently working on my 1989 Yamaha front end.  The cv axles were bad so I changed them on both sides with all new wheel bearings. Now I'm looking at the front brakes and the 2 cylinders for the brake shoes on both sides do not work at all. I am also new at working on brakes so its a mystery to me what needs to be done to fix the cylinders.  Can somebody please help me with these brake issues? See the image below.
      Thank you,
      Olchap

    • By Old55
      Selling 1994 king quad.  $400.00 Complete quad. Engine is stuck. 
      Located in Highland Mi.  248 514 0888  Old55
    • By wjmedic
      Recently rebuilt front end on this Polaris 400. New axles, bearings, seals, control arm bushings, Hilliard clutch thoroughly cleaned and inspected with no damage noted. 
      Everything put back to together. Placed bike on jack stands all four wheels off the ground, started in 2 WD switched to AWD both front tires spinning, when AWD turned
      off right front wheel will not disengage from AWD. Checked voltage at connectors both left and right connectors have no voltage with AWD switch off, and both have 12.4V
      when AWD switch is turned on. Repeated turning switch on and off several times with no change in condition. I am thinking this must be something mechanical with the 
      Hilliard clutch on the right hub ie. weak spring or stuck rollers on the Hilliard clutch assembly (Is this a logical thought?) any ideas on trouble shooting this before I disassemble the 
      right front hub again 
×
×
  • Create New...