Quantcast
Jump to content

Recommended Posts

Posted

its running out a pipe at the bottom of the quad..maybe there is a valve on the gas tank? im not sure how to stop this...I think the previous owner of this quad drained the fuel tank of this quad but now I want to stop the draining

Posted

never heard of your quad, I thot this was a joke. there is always a fuel valve easily reached with the left hand while sitting on it. the drainage out of the bottom is likely to be overflow from the carb. send us a pic of this Shineray!

Posted

So it is pooring out the bottom of the tank, right? That little nozzle coming out of the tank is the petcock valve. There should be a little lever or something you can turn to a horizontal position. Vertical position is open valve and allows gas to run freely. Horizontal will close it. The hose goes back on the little nipple coming out of the tank.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By Topendcol
      First issue was fuel pump wont start once ignition has been turned on. Replaced the pump as I had one on hand, than noticed no power so replaced the fuel pump relay as that was were i traced the power to. Still nothing so further inspection looks like signal is coming from the PCM (FLR B20) but not switching the the brown wire to the fuel pump. Ive checked the operation of the bank angle sensor and it appears operational. Fuses and wiring all appear OK. The engine stop relay also tests OK. Ive been through the repair manual and diagrams but to no avail. Fully stumped, any tips would be helpful. Thanks
      Col
    • By Whiterabbit
      New to me Quest 650 with the Rotax engine, auto trans. Looking at the starter solenoid there are the usual wires, Batt+ in and Batt+ out to starter and the 2 lil wires to the ign start button but there is a factory box with 2 lil wires coming out mounted to the frame next to it, one wire is connected to one of the large Batt terminals (12 o-clock position in pic). The other wire from the box is just dangling out in space. I can't find where that loose wire goes and what the **** the lil' box is. 😆 Need some insight please.
       


    • By Shinerayxy300ste
      I need the wiring diagram for a shineray xy 300stx quad.i got a project from a friend cause he butchered the wiring.and got feed up with it so.i acquired it. Just hard to find any manuals
    • By Mikael
      I recently bought and old Kazuma Dingo 150cc and to begin with it started just fine. Then, for no apparent reason, it wouldn't start. It turns the motor but fuel isn't getting to the spark plug.   
      As mentioned in the title I've since replaced the fuel filter, the carburetor, the ignition coil and the spark plug. Fuel comes into the carburetor but seems to go no further. Is it a vacuum problem? Does anyone have a good idea about how I could diagnose the problem? And how to fix it?
      I don't know what year it's from, sorry.

      Sincerely
      Mikael
    • By Hooquad
      Hey, I'm looking for manuals for Shineray XY300STE, Repair and User manuals would be appreciated if someone has those
      Thanks.
×
×
  • Create New...