Quantcast
Jump to content

Recommended Posts

Posted

Hi,

I am looking for a decent of tires for mostly rocky terrain. Any suggestions?

I am considering the ITP's and the Longhorns.

I have a 2008 Honda Rancher 420 with stock rims.

I blew holes in the sidewalls of two of the stock tires so I figure I better just get new ones.

Thanks.

Posted
Here's the one's I am looking at. The next question is how do I know what size to get?

Maxxis Bighorn 2.0 - ATV Direct - ATV Tires and More - www.4atvtires.com

The existing tires are as follows:

Front: AT24x10x11

Rear: AT24x8x12

The only sizes in the BigHorns are:

25x10x12

25x8x12

Will these work on the existing rims? Thanks.

You will only be able to put 12" tires on the rear... your front rims are 11"

Have you looked here: Maxxis Bighorn » QUADCRAZY ATV Parts and Outdoor Gear

Posted

Kenda BearClaws are an awesome tire for a 4x4 quad. Stay with stock size. My uncle runs them on his 04 Rancher, he has about 1200 miles on them. With about half tread left. He rides on roads and rocky Kentucky terrain. Alot of people in Kentucky run them . All around good tire. Ran them on my Ozark for 3 years to.

picture.php?albumid=5851&pictureid=26686 Here is a picture of mine with BearClaws on it.

Posted
the good thing is that its a 6ply tire u wont be worrying bout popping holes in the side walls like ur stockers which were probably a low rated ply right?
Also have bead protecters built in. Roofing nail was the only hole I ever had in them.
Posted
Do they come sized for an 11" rim?
To answer your question Bot, yes they do. Along with Mudlites and AMS tires, the Kenda BearClaw has one of the greatest tire selections for utility quads on the face of this planet.
Posted
I'm impressed. I know what Kenda is all about...high quality on a budget. I use Kendas on my dirt bikes. Never knew that they had 11" though. Thanks BB
Just glad I could share what little knowledge I have.:smilielol5c:
Posted
the good thing is that its a 6ply tire u wont be worrying bout popping holes in the side walls like ur stockers which were probably a low rated ply right?

Yes, that will make all the difference in the world. I think the stock tires are only 2-ply.

  • 11 months later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By Atomusthenes
      I would appreciate being pointing in the correct direction for a wiring diagram and or schematics of the 88 Honda FourTrax 300 4x4 if anybody has any knowledge of how to test the ignition system stator and CDI I don't know if the voltage regulator probably and also the FCU I put a new ignition in it it is a cheap aftermarket one doesn't have the correct plugs but has the correct wiring scheme I get power  the neutral light comes on and the oil light stays on it turns over but I have no spark
    • By Coyote251
      I'm trying to help a buddy out with his bike (he's not really on the internet or familiar with these forums) and I'll admit that I am not super familiar with the transmission and clutches in these bikes. I owned a Brute a few years ago, but never had an issue like this that I had to troubleshoot.
      So basically my buddy bought a group lot of 650's to build one good bike out of. He got it all put together and has it running but when he pushes on the throttle the clutch doesn't engage till the RPM's are quite high and even when its moving it doesn't really speed up, almost seems like its in "limp mode". He's tried 2 different transmissions so I don't think that's the problem. 
      Is there any adjustment on the clutch engagement? Anything else I can tell him to look at? Let me know if you need anymore information if you think you can help.  
    • By 1998Zuki250
      Looking to see if anyone has any input on ATV Tires? 1998 Suzuki quadrunner LTF250
    • By Trent Finnessey
      I’ve got a 2000 400ex with a dg slip on muffler, it came with he stock muffler on it but the previous owner had the dg in a box so I put it on. I’ve been riding it for the past month and a half and every time I let off it backfires, and the other day the backfires got way louder, 2x louder! I’m concerned that I may hurt my motor? Why does is backfire??? Thanks
    • By Dumass
      My name says it all. I have a '03 Honda Sporttrax 400EX with a new aftermarket carb on it that seems to be having issues. I can start it but it idles really rough and when I give it throttle it just kills the engine. I have tried adjusting the idle screw but to no avail. I am in the San Diego Ca area. 
      Any advice will be greatly appreciated. I would also like to get an owners manual for the thing too but can't seem to find a downloadable one.
×
×
  • Create New...