Quantcast
Jump to content

  • Join Today, It's Simple and FREE!

    As a member, you can post in our forums, upload your photos and videos, use and contribute to our downloads, create your own member page, add your ATV events, and even start your own ATV club to host your own club forum and gallery.  Registration is fast and you can even login with social network accounts to sync your profiles and content.

snowymountainwintersports

Oem polaris parts 50% off retail @ snowy mountain wintersports

Recommended Posts

Hello,

I am new to QUADCRAZY and I thought I would introduce myself and my business.

Snowy Mountain Wintersports is located in Bonners Ferry, ID a small timber community located in the northern panhandle of Idaho. We buy and sell NEW OEM POLARIS ATV, RANGER, PWC, and Snowmobile parts, we also manufacture and sell our own brand of left hand throttle kits for snowmobiles.

Snowy Mountain Wintersports has been in business since 2000 and We always strive to do a great service for our customers and care about the end result being a good one.

All of our parts are brand new and still in the original Polaris packaging, we are not a salvage yard so we don't sell used or take off parts.

We sell and ship parts worldwide from our retail location and we welcome you to stop in if you are in the area. Questions are always welcome, either by e-mail [email protected] or call 406-788-7491.

We try to sell all of our parts for 50% off of Polaris retail price, and with over $100,000 in inventory we have someting for everyone.

Please check out my store eBay Store - Snowy Mountain Wintersports: New Old Stock Polaris Parts, ATV, PWC

Share this post


Link to post
Share on other sites


Welcome to QUADCRAZY! Do you have any Xpedition parts? I'm looking for a front rack, plastics..

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Similar Forum Topics

    • By Christian Brindle
      I have a 2000 Polaris Sportsman 500. A year or so ago we got it running after replacing the kill switch. It ran great but after some use for a couple months it got a flat tire and for some reason we just forgot about it and it sat for some time. Before it sat i replaced the gas cap, fuel filter, fuel pump, petcock, battery, starter relay, oil and oil filter. I recently went to start it and it started so quickly and without choke or throttle but the ATV wouldn't move till about 1/4 throttle and it wasn't really a smooth ride until 1/2 throttle. it also would bog out randomly after you came to a stop and sounded like it was getting too much fuel. I cleaned the carb and adjusted the air/fuel screw to 1 3/4 turns out.  I also messed with the idle and the throttle cable adjuster up on the handlebars. It's safe to say it now runs worse than when i started working on it 2 days ago. It takes more effort to get started and bogs out idling after about 30 seconds. I tried adjusting the idle but every time i do it'll get to a sweet spot but after driving it down the driveway and back the idle will go up and down to the point where i can't put it in gear because the gears will grind. Any thoughts or ideas would be greatly appreciated. Thanks
    • By JacobSlabach
      Got a 04 Sportsman 500 that wasnt running- owner said it needed a stater and a new battery.  It ran rough (been sitting out in the weather for a while).  A friend and I started by adding a new battery and it would start barely with the choke and his hand over the air-filter.  I decided to install the new battery in the holder on the side.  we had it on the rack because the old on was still in the bike.  I tried to be nifty by turning the battery to put the terminals in an easier spot to get to, but forgot to reverse the cables too.  In a sentence, I reversed the positive and negative on the battery like a dummy.  When we discovered my mistake and corrected it, we turned on the bike, but the display did not light up and the key did not turn on the starter.  jumping the solenoid worked the starter, so we thought the solenoid just burned up when I reversed the pos and neg...  new solenoid and no difference.  what have I burned up?  Also, the shifter does not seem to do anything in the trans.  it slides back and forth like its stripped in the trans.  any help would be appreciated!!
      I think the biggest issue right now is the electrical.
    • By joninak
      I'm working on a 2018 Sportsman 570 and found in the service manual that there are two different torque methods for the head bolts depending on whether the bolts are silver or black. Well, silver bolts came out of my engine and I'm going to be replacing them with new bolts, however the parts fiche doesn't specify bolt color or that there is even an option!?! 
      Has anyone on here been through this before and can offer insight??
       
      TIA
       
    • By flyinbrian365
      View File 2005-06 Polaris Sportsman 400 450 500 Service Manual
      2005-06 Polaris Sportsman 400 450 500 Service Manual.
      Full ATV service manual
      Submitter flyinbrian365 Submitted 02/18/2019 Category Polaris ATV  
    • By PolarisRich
      I've never done this before but after reading a few thread I decided to check my valves for the first time and to my surprise it was much easier than I thought.
      My bike is a 2005 Sp 500 HO.
      I first pulled the seat and the right side panel off, and that's it! It wasn't too bad to get at.
      Next I pulled the spark plug out and removed both the head cover ( 8-8mm bolts)
      [ATTACH]1021[/ATTACH]
      then the side cam cover (5-8mm bolts).
      [ATTACH]1023[/ATTACH]
      Also remove the plug in the recoil cover (14mm bolt) to see the timming marks.
      [ATTACH]1022[/ATTACH]
      Next I turned the engine over with the pull cord untill it was at TDC of the compression stroke.
      The best was to tell that your at TDC of the compression stroke is to rotate the engine until the
      timing marks are parallel to rocker cover gasket surface.
      The cam sprocket locating pin will be facing upward directly in line with the crankshaft to camshaft center line.
      Now fine adjust by looking into the timing hole in the recoil cover and line up the upside down "T" on
      the flywheel into the center of the hole.
      [ATTACH]1023[/ATTACH]
      Now using a feeler gauge, slide the .006" (.15mm)blade between the top of the valve and the bottom of the adjuster and adjust accordingly
      [ATTACH]1024[/ATTACH]
      [ATTACH]1025[/ATTACH]
      To adjust, Loosen the locknut (10mm) and check clearance with a feeler guage. Clearance should be .006" (.15mm) for both, intake and exhaust valves. Turn the adjuster with a stubby flat blade screwdriver untill the proper clearance is achieved then tighten the locknut (5.8-7.2 ft. lbs) while holding the adjuster in place with the screwdriver. Re-check the clearance with the feeler guage one last time and re-assemble the covers (72 in.lbs) and plugs.
      The only thing that i noticed was that I had to clean and silicone the side cam cover other than that I found the whole process rather simple.
      I'd give it a 4 out of 10 on the skill level scale.
      I hope this helps!
      Thanks Rich





  • Similar Tagged Content

    • Guest huntingstill
      By Guest huntingstill
      k I would like to take my one person off road go cart and turn it into a sand rail LIFT it new engine and transmission make it so you have to shift w/ a clutch and all the fun stuff a car has
    • By RoxanneRoseReid
      Need a polaris manual for a 1994 2 stroke 2/4x4 quad free. can you please post a link I can click on Thank you. Roxanne
    • By Aidan
      Hi, 2 years ago I got a 2002 Kawasaki Lakota Sport 300 for $50. Yes, I know, vary cheap, and it came with issues. The issues were, a leaky oil cap, a carburetor that fails when going up or down hill, and a flat tire that will not fill up. It also has a broken exhaust, as in broken, the tip of the exhaust is no longer there, so it is loud, but works fine. I have the oil cap, and a carb repair kit, but I need help finding a right rear tire for it, also I need ether a entirely new exhaust for it or somehow repair it, I dont have the old piece to the exhaust. Feel free to ask me questions. I will put a pic of what the exhaust is supposed to look like.


    • By buzzar56
      I am looking for a free repair manual for a 2003 Polaris sportsman 500 ho atv. all the posts on here lead me noplace
      thanks fred.
    • By Weldingrod47
      Trying to change front wheel bearings. I removed the cotter pin and castle nut. Hub won't budge. Is there an additional retaining clip? Seems to be one of those push on type that barbs on the thread of the spindle. How do I remove it?
  • Recently Browsing   0 members

    No registered users viewing this page.


×