Quantcast
Jump to content

Well I traded

Snipe

By Snipe
in General ATV Discussion

 Share

Recommended Posts

Snipe Contributor

Snipe

Posted
Posted

I traded that rancher I had but not for the Z400 that guy just didnt set with me right. Had an offer on a warrior I figured what the heck looked at it looked it all over and it was leaking oil so didnt do that either.

I ended up trading with my brother in laws parents for a 2001 400ex its all stock other than it has a FMF exhuast and some nerf bars. But it was totally worth the trade to have an extra play bike for company nothing major for this bike need my money other places lol.

Will get pics up soon.

Snipe Contributor

Snipe

Posted
  • Author
Posted (edited)

l_0814464386e146c49472846451621ed2.jpg

l_71325c78744740fc958b70893e6a753d.jpg

l_64ff144ccf5041048b17269b640c7813.jpg

There it is I used some of my stock stuff off my 08 for it. Touched up the frame put the 08 shocks up front and the filter looked drab not even wasting the time to clean it. I had my stocker as well already oiled in the UNI bag from when I bought it lol. Just put it on there as well. Looks pretty nice now.

It came with nerf's I put them on my 400 and put my AC's on it im happy with it.

Edited by Snipe
Snipe Contributor

Snipe

Posted
  • Author
Posted

They ride awesome! I have never road anything so smooth or plush from the factory. They are low end machine with the top end as well. This one is pretty well stock and it will leave a bored out .020 raptor behind. There a very well designed machine.

Only thing I dont like is the is the different than just plain DS650 and its all a bit wider more like a MX style bike at 50" in the rear its tight on trails but gets the job done.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Forum Topics

    • LCP92
      Leaking valve seals?
      By LCP92
      Guys, I've got a 1999 Honda Foreman 450S.  It runs great, but smokes out the exhaust after startup until it warms up.  I'm thinking the valve seals are leaking.  I was wondering if there is a way to replace them without removing the head or if there's an oil additive that will recondition the rubber seals.  Any advice?
    • BillR94
      1998 Polaris Magnum 425 starts but dies right away.
      By BillR94
      I picked up this ATV that had no spark. The previous owner said he was driving it and it died and would not start. He discovered it had no spark. He replaced the CDI and the coil with no luck. He got tired of it and I bought it. I replaced the stater and now it has strong spark. Now, it starts for a second or two then dies. It will not stay running. I have checked the timing and it is spot on. The valves are adjusted correctly. I see no warn issues with the cam. I put the original CDI and coil back on it. Same problem exists. Compression is at 65 psi (has decompression mechanism),
      I took off the muffler in case the issue was clogged pipes. No change. I replaced the spark plug. No change. The carb was an aftermarket so I put a Niche carb on with no change. I bypassed the fuel pump and that did nothing to solve the problem. 
      I don't know if this is a carb issue or an ignition issue. I am looking around locally for an OEM carb to try out but not sure that will fix the problem. 
      Can anyone help me solve this problem. I am running out of ideas. 
      Thank you for your time
      Bill
       
    • Rick Shropshire
      Warrior 350 air filter mod
      By Rick Shropshire
      I recently picked up a  2000 warrior 350 and it doesn’t have the air filter box so I was thinking about using a clamp on filter directly on the carb.  Anyone know what I need to get or where I can find it? The one I ordered goes in the box and won’t fit directly on the carb.
    • wjmedic
      2003 Polaris Sportsman 400 - Right front tire will not disengage from AWD
      By wjmedic
      Recently rebuilt front end on this Polaris 400. New axles, bearings, seals, control arm bushings, Hilliard clutch thoroughly cleaned and inspected with no damage noted. 
      Everything put back to together. Placed bike on jack stands all four wheels off the ground, started in 2 WD switched to AWD both front tires spinning, when AWD turned
      off right front wheel will not disengage from AWD. Checked voltage at connectors both left and right connectors have no voltage with AWD switch off, and both have 12.4V
      when AWD switch is turned on. Repeated turning switch on and off several times with no change in condition. I am thinking this must be something mechanical with the 
      Hilliard clutch on the right hub ie. weak spring or stuck rollers on the Hilliard clutch assembly (Is this a logical thought?) any ideas on trouble shooting this before I disassemble the 
      right front hub again 
    • sunn
      Right Hand side panel for heat reduction on 2017 Sportsman 570
      By sunn
      Has anyone had experience with the installation of the Optional RH Side Panel Close Off Kit as shown as p/n 2207445 which is supposed to help control the heat on the right side on my legs?  Right now that panel is wide open with excess heat on my leg.

COMMUNITY SECTIONS

ATV FORUMS

QUADCRAZY MEMBERSHIP

Be a part of best online community of ATV riders and join thousands of people who love ATVs! Share your ATV photos, videos, ATV rides, get help with your ATV and more. Not a member?

SIGN UP TODAY

ADVERTISE WITH US

FOLLOW US ON

  • Automotive Webmaster
×
×
  • Create New...