Quantcast
Jump to content

  • Join Today, It's Simple and FREE!

    As a member, you can post in our forums, upload your photos and videos, use and contribute to our downloads, create your own member page, add your ATV events, and even start your own ATV club to host your own club forum and gallery.  Registration is fast and you can even login with social network accounts to sync your profiles and content.

BuckBilly

BuckBilly's 2009 Honda Rubicon ride report.

Recommended Posts

I bought an 09 Ruby about three weeks ago. Only have 30 miles on it. I will share my opinion of it with you.

It has a 499 cc liquid cooled engine. Part time four wheel drive. Automatic tranny with High and low range. With the ability to be in auto or thumb shift mode.

The tranny is very smooth. It's a hydro stat transmission.I mostly use auto mode, but when I have used ESP mode I also like that feature.

Going into 4x4 mode is also smooth. Engine braking is unbelievable!!!! Handling for trail and dirt road riding is outstanding!! Stock tires work great for stockers. Ergonomics are also great(for me).

I have added a 2500 lbs winch. I will be adding hand guards, and a snowplow soon. I currently modifying the plow from my old Ozark to fit. I have widen it from 46 inch to 58 inch wide. Looks like something out of a Mad Max movie.

Share this post


Link to post
Share on other sites


So, I take it you are pretty happy with the new ride then? Lets see some pics when you get the Mad Max look completed.

Share this post


Link to post
Share on other sites
So, I take it you are pretty happy with the new ride then? Lets see some pics when you get the Mad Max look completed.
I'm really happy with it. Get some pic when I get the snow plow built and it stops raining.

Share this post


Link to post
Share on other sites
Glad to hear you are happy with it.
Only complaint I have is , I did not buy it sooner.

Share this post


Link to post
Share on other sites


Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Topics

    • By chuckufarlie
      I have a 2018 Kodiak 450 EPS that just this past Sunday I ran through a bit of water.
      After the puddle the belt was slipping, so I pulled over and drained the ultramatic housing and the slipping problem went away. This was all in L and everything seemed to work fine. Later when I got on a road, I put it in H, but it still rode like it was in low... i.e. I had to rev it up a lot just to get to 30mph.
      When at home I pulled the ultramatic cover off to inspect, and it looked okay in there. Not much dirt, belt and everything are clean, but when I rev up the engine (with cage in place, of course), the belt doesn't get to the top of the clutch (maxes out about an inch or 1.5" from top of clutch, so maybe it is normal).. I put it back together but same thing... H seems like L still.
      Do you think the clutch needs to be further dissected for cleaning, or could this be an issue with the gear selector?
       
    • By Eddie Lambert
      So I picked up a Cannibal that has been sitting for many years. I wonder if anyone can tell me where that vacuum port is on the engine. I’ve found the one to the air box, pressure regulator, and ecu but can’t seem to locate the one on the engine. Thanks in advance for any help. 

    • By Ashton Crawford
      Hello everyone, i have 2000 Polaris Trail Blazer 300 I’ve been stumped on for weeks. I’m having a lot of issues starting the quad. I cleaned the carb spotless because I thought it was a carb issue and bought a new fuel line because it wasn’t getting fuel. The carb gets fuel perfectly fine now but it won’t start. The spark plug I a little worn out but it’s good enough for just one start. The only time it does “start” is when I spray starter fluid into the carb. But it never stays on. It’ll start for a bout a second then just die out immediately even if you’re giving it some throttle and the choke is on. I have no clue what I should do. If you need more information, have questions, or have any slight idea what the issue would be and how I could resolve it. Please reply ASAP. Thank you.
    • By bradleyheathhays
      I bought a 2011 Crown Vic with 300k miles 12 mos ago and I'm wondering how to approach servicing the timing belt. I know very little of it's past maintenance records other than what I've done with it this past year. Basically I'm wondering if I should go ahead and attempt to replace it now, or wait til something starts to go wrong. I don't know how timing belts typically go bad...if they just break or start to stretch or what. If this is an interference engine I'm imagining a fairly bad event so I'd like to get educated and be pro active about it.

      Second...Scotty Kilmer teaches that the worst wear an engine sees after changing the oil is before the oil gets pumped back into the filter and then into the engine components during the first engine restart. But he says if you disable the ignition spark somehow when cranking for the first time again, the lack of combustion in the cylinders helps with reducing this kind of wear quite a bit. I don't have an owner's manual and I'm not sure what fuse to pull to disable combustion ignition, or if removing a fuse would be the best way to do this. Any opinions on how this should be done?
    • By ezduzit
      picking up atv tomorrow, guys says motor is locked up. he thinks, anyway has been sitting for more than three years. Please understand i have not touched it yet but if his description is accurate im looking for suggestions on freeing it up before  having to tear it down. I'm hoping to get some great info from the pros on Quadcrazy.
  • Similar Tagged Content

  • Recently Browsing   0 members

    No registered users viewing this page.


×
×
  • Create New...