2003 Kawasaki Bayou 250 Carb Setting?

[lawehage]

Does anyone know the factory settings for the 2003 Bayou 250 carberator?

Thanks

Louis

410 322 3399

[face-first]

DUDE

IF IT IS A KLF250 A1

GOES LIKE THIS

(A BIT MESSY, BUT SECOND NUMBERS ARE FOR KLF250A2)

Throttle Case and Cable

Throttle Lever Free Play 2 ∼ 3 mm (0.08 ∼ 0.12 in.) – – –

Carburetor

Make/Type MIKUNI VM24SS – (A BIT MESSY, BUT SECOND NUMBERS ARE FOR KLF250A2)

Main Jet #115 #120 – – –

Main Air Jet 1.0 1.8 – – –

Needle Jet O-6M O-2M – – –

Jet Needle 5GN64-1 5GN74-1 – – –

Pilot Jet #30 #22.5 – – –

Pilot Air Jet 1.3 1.0 – – –

Pilot Screw 1 1/2 turns out 2 1/2 turns out – – –

Starter Jet #45 – – –

Idle Speed 1 300 ∼ 1 400 r/min (rpm) – – –

Service Fuel Level 5 ± 1 mm (0.20 ± 0.04 in.) – – –

below bottom edge of

carburetor body

Float Height 22.6 ± 2 mm (0.89 ± 0.04 in.)

DOESN'T SAY WHAT NEEDLE POSITION, BUT USUALLY 3rd, (MIDDLE)

HAVE FUN