Quantcast
Jump to content

  • Do you own an ATV? Join our Forum!

    As a member, you can post in our forums, upload your photos and videos, use and contribute to our downloads, create your own member page, add your ATV events, and even start your own ATV club to host your own club forum and gallery.  Registration is fast and you can even login with social network accounts to sync your profiles and content.

ItchWeed

400 ex parts!! Come get em!!

Recommended Posts

I started parting out my quad and as I was doing it, fell short on cash. I NEED TO SELL THIS OR MY DAUGHTER ISNT GETTING XMAS PRESENTS!! Please if anyones interested, Please send me an email. [email protected] I dont get to get on the computer much and email goes to my phone. I ship priority day payment is recieved and I am paypal verified. Onto what I have.

2001 Honda 400ex motor- First off the motor has a 440 Kit installed on it. Motor has the 12.5-1 Compression setup. New Wiseco piston, Cylinder, rings, all new gaskets top to bottom, Timing Chain, NGK Plug, Hot cams stage 2, Mild Porting done to the head. This motor is quick! This is a direct bolt in, Ready to run with no problems what so ever. There is under a hour on this motor. Seriously the best motor I've had. Only reason I am selling it is to go hybrid. All you'll need to do is set in your frame hook up neccesary lines and bolt it in. Its a good motor and stand behind it 100%. I am asking 350.00 + shipping. Should be around 100.00 to ship it.

Lonestar +2 Swing arm- The arm was painted black awhile back. Paint is obviously chipping off but there is absolutely nothing mechanical wrong with it. Its a great swing arm and performs like its new. My asking price on this is 200.00 + Shipping.

Durablue +2 Rear Axle- Axle is in great shape. Asking price is 150.00 + Ship

Gibson Pro +2 Steering stem- The stem is in great condition. Its a +2 Model and it worked great on this quad. Won't need it in my next build. Straight with no damage or defects. Comes w/ Tag Bar clamps. I'd like to see 120.00 + Shipping for it.

Magura X-Line Buldge handlebars- Great shape come w/ black grips. Asking 40 + Ship.

SRP Metals 7way Adjustable Steering stabalizer- Almost brand new, Wasn't on a quad before this one. 40 + Ship

2001 Honda 400EX Frame- The frame was bought when the bike began being built. It had been used during a buddy of mines build and he had the frame powdercoated yellow. It looks nice, Yellow just isnt my color or else I'd be using it to build my next one. If it doesnt sell its not a big deal I'll strip it and powdercoat it color I want. Powdercoat still looks nice and I am asking 75.00 + Shipping on the frame.

White Bros Rev Box- Like new. Barely used at all. 30 + Ship

Keihin Carb- Carb was actually just put on a week ago. Bought off the local craigslist, Works great. Carb was just serviced and fully cleaned before I purchased it. Asking 150 +Ship

Stock Brake Lever/Clutch Lever- 25.00 + Ship

Please email me if interested. [email protected].

Thank you!

Share this post


Link to post
Share on other sites


Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Topics

    • By Dra O
      posted a while back - it was running at one point - I have all the plastic shroud off - it's down to frame and engine now
      -fuel pump: when line from petcock is attached, no fuel comes out other side to carb; the line to the carb is open (can blow through it); I thought when I cranked engine that the pump would spit out fuel on other side but it does not; I removed fuel pump and opened it up - diaphragm looks good - but internal areas had lotsa calcification build up - I cleaned this out and dried it good - the clear plastic pieces (?diaphragms) aren't broken - the spring w/ steel ball on end moves freely; am putting it back on tomorrow; but can anyone answer about the pump? isn't it supposed to pump fuel through it... to other side... to carb? puzzling
      -along with fuel pump: I replaced petcock 3 weeks ago (gas tank had rusty fuel in bottom - cleaned it out prior to new petcock); when I turn petcock arrow NOT to on or reserve, fuel comes out of line; when I turn it to on or reserve, fuel doesn't come out; puzzling
      -I don't know what's on back of fuel pump - it's a valve that has a hose coming out of it - looks like it goes to engine/carb - I haven't traced this out yet - what is it?
      -can squirt gas on air filter and engine will run for 2-3 seconds then stop - fuel in top of carb (under diaphragm) does same
      -it likely needs carb rebuild - will get to this - but something isn't allowing fuel to get from fuel pump to carb
      -I THINK it has a mikuni model x carb - diaphragm is ID 26mm  OD 68mm - hard to find inexpensive diaphragm, I guess because it's a model x
      -last thing - I replaced solenoid due to old one clicking; I HAVE to be charging the battery or it won't start/turn over - battery just goes dead; but if charging, it'll turn over nicely; i'm guessing it's a bad battery
      -any help appreciated - I've never owned an ATV before - inherited this beast from grandparent in-law
    • By Ed Zeppeli
      Hi,
      Oddly I'm having  a hard time ordering front brake shoes for my '98. 
      I'd appreciate recommendations on decent, widely available shoes if possible. Ideally available in Canada on short notice.
       
      Thanks much,
       
      Warren
    • By Rich1028
      Leota Quad Trails  on New to us  Machines 5-10-20
      We Just Picked up two Quads Friday,and we took them out riding,great machines!
      2008 Honda 400 Ex and a 2014 Honda 400 X

       
       
    • By hornythrony
      Hey I have a 07 king 700 there's lots of times that the quad will stall when the fan turns on also have to bump motor 2 or 3 times before starting to start it (makes fuel pump go on 2/3 times) anyone having or had this issue?
  • Similar Tagged Content

    • By Wali
      I was riding my 400ex one day and when i shut it off to put it in the garage i tried to start it put again to drive it into the garge and it wouldnt start.I put a compression tester on it and its like 30 psi with out throttle and 0 psi WITH THROTTLE.
      when i put my finger over the hole it fell likes its pulling my finger in more then its pushing it out 
       
      Has good spark.When i took it into the shop the said it had 1oz of oil in it and a tiny pit of metal shaving(TINY BIT LIKE 30 flakes)
      When i try to pull start (push start/roll start) it made a not normal sound  and wouldnt stay running.
      If my bottom end is blow why would it still turn over fine,
      Are my valves siezed or not working properly 
      or is my timing off causeing valves to not open in correct order with fire 
      PLEASE HELP all help is appreciated 
    • By Hunter Aldridge
      Some times I get spark some times not can ride then it just dies and wont get spark it has new cdi box and stator but I don't know if it has the pickup coil I'm at a loss
    • By William Sims
      I have a 400 4by4 ,2005 green model,
      wounding how many different CDI boxes will work on it
       
    • By jerry houston
      Eiger 400 Suzuki runs fine Cook-Out joke face off the handlebars put it back on and will not start now will crank no no spark
    • By colin james
      View File 2012-2014 Polaris Sportsman 400 HD Service Manual
      This the factory service manual for the 2012- 2014 sportsman 400 hd service manual 
      Submitter colin james Submitted 02/08/2019 Category Polaris ATV  
  • Recently Browsing   0 members

    No registered users viewing this page.


×
×
  • Create New...