Quantcast
Jump to content

Recommended Posts

Posted

Ive been working on a 93 Bayou and I need some help. You can start it just fine when its cold. But if you run it for less than 30 seconds then it will not restart by using the electric starter. It will turnover but not fire. But you can drift start it for less than 2 feet and it will run just fine. It runs just fine, but has that starting problem. Can you offer any advice?

Posted

Well it has fire when you use the start button but the thing wont start unless you drift start it and the starter works fine! I think something must be pullin some fire from the coil or something? i checked the pickup coil and it test right and i have spark on the plug when i use the start buttom but has to be drift started to work

Posted

Starter is working fine, dont think its a short.

After swapping parts with a running lakota, and by checking around with the voltmeter, we think it is the pick-up coil.

It has gotten to the point to where it will not run now. Which helps in diagnosing it. Ordered a pickup coil the other day. Hopefully that will fix it.

Posted
Starter is working fine, dont think its a short.

After swapping parts with a running lakota, and by checking around with the voltmeter, we think it is the pick-up coil.

It has gotten to the point to where it will not run now. Which helps in diagnosing it. Ordered a pickup coil the other day. Hopefully that will fix it.

Let us know how you make out with this.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Popular Now

  • Similar Forum Topics

    • By HTOverland
      We have two 2021 850 XTP MAXX OUTLANDERS with nearly identical VINS. Both ATVS had the DPS error out the exact same week. Repair shop says need new DPS motors. How is that possible? Anyone else have DPS issues?
    • By realpilot
      I am unable to find a wiring diagram for this UTV.  When I turn the switch to on, the contractor does not engage.  The Brake pressure switch and the parking brake switches work correctly. What else should I be looking for?  All of the diagrams I have found are for newer models and the wire color coding is different.
       
      Thanks
    • By logray
      Hi all, 

      I am wondering if any of you have a Clutch Starter gear from a 1988 era quadrunner 250 sitting around that you could get me a precise measurement of the outer diameter of the race the sprag engages onto, for me? I need to machine a damaged race down and install a hardened sleeve and need that measurement (it's on a different gear than the OEM one, so I can't buy and use a OEM gear). 

    • By OldATVowner
      Just getting into this issue really. Been replacing solenoids but now I'd like to track down the problem. This time I'm not getting neutral/reverse lights or start button. Was on a creek ride when it started doing this recently. It cranks by arcing the solenoid and gives me no light or start button but if I crank with the pull cord....the neutral light and the button work. Turn it off and try to crank with the key and nothing. I'm looking into the safety switch issue tomorrow and re charging the battery. Just figured this was odd enough of a problem that you guys might be familiar. Thanks
    • By rjsummer
      Just picked up an 84 LT185 ATV, I understand there was an accessory add  on that gave it electric start, anyone have any info about that kit? 
×
×
  • Create New...