Quantcast
Jump to content

2004 Yamaha Bear Tracker carburetor setting?

EDUARDOFLORES2

By EDUARDOFLORES2
in Yamaha ATV Forum

 Share

Recommended Posts

DirtDemon Veteran

DirtDemon

Posted
Posted

Your best bet would be to look at a repair manual, or contact a Yamaha dealer for the info. Stock pilot is 42.5 and stock main is 95. 1 1/2 to 2 turns out on the pilot screw is a good place to start. The middle slot is a good place to start with the needle clip postition. See how it runs and make one adjustment at a time to get it dialed in. Pay attention to what your plug looks like while you are getting it tuned.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Forum Topics

    • Lukequinn
      Yamaha beartracker 250 Quad problem
      By Lukequinn
      I have a Yamaha beartracker 250 that I can’t seem to get running right
      i am after replacing the spark plug, carburettor, and the carb boot to the engine when she starts she revs up like mad  even when the mixture screw on the carb is fully in when running she pops and stalls and won’t rev up 
      has anybody have any idea what could be wrong with it thanks
    • DirtDevil
      99 Yamaha Beartracker lost power and shut down
      By DirtDevil
      I'm new here, so I would like to say "Hello" to everyone and hopefully, someone will be able to point me in the right direction to troubleshoot an issue. Last night I was riding and all of a sudden ATV lost power and shut down. I was able to get it shifted back down to neutral and tried to restart it. Neutral light on, engine cranks, but it will not start. I haven't really looked at it yet to attempt dieagnoses, since it was getting dark and needed to get it pulled back to garage. Any Idea's of where I should start troubleshooting?? Thanks for any and all help!
    • IRONhead85
      Yamaha beartracker 250 starting issues
      By IRONhead85
      When I turn my key on the neutral light doesn't come on. I can jump the starter relay and it comes turns the starter but it won't start. The sky blue wire is connected. New battery, start button, cdi box, starter relay, sparkplug, sparkplug cable, rectifier and regulator, and new key. 
    • RamzV
      Tps settings on 2019 outlaw 110 ?
      By RamzV
      I tested the tps and I'm getting 4.28v at closed throttle and goes down to 1v or so full throttle. I can't find a service manual does anyone know if 4.28v is close to correct 
    • PeteSaracen
      04 Yamaha Beartracker No electric start, No neutral/reverse lights, only starts with screwdriver to both relay terminals
      By PeteSaracen
      Im fixing up a beartracker 250. Starts right up with screwdriver to both solenoid terminals and pull start. Doesnt start at all with electric start button.  Neutral light and reverse light come on when the atv is running but when it is off and the key is turned to on position, no lights come on. When button is pressed to start, nothing happens. No click in solenoid, nothing. Not too experienced with the electrical components but I have tested a few things. The Front stop switch assembly cable was broken so I replaced that hoping it would fix my electrical problem to the key bevel but still nothing. 

COMMUNITY SECTIONS

ATV FORUMS

QUADCRAZY MEMBERSHIP

Be a part of best online community of ATV riders and join thousands of people who love ATVs! Share your ATV photos, videos, ATV rides, get help with your ATV and more. Not a member?

SIGN UP TODAY

ADVERTISE WITH US

FOLLOW US ON

  • Automotive Webmaster
×
×
  • Create New...