-
Do you own an ATV or UTV? Join our Forum!
Join QUADCRAZY ATV Forum today for FREE! We keep these forums clean and user friendly. All first posters will have to wait to have their content reviewed and approved. Once your first post is approved, you will no longer need to got through an approval process. To gain immediate approval and a NO ADS experience, consider subsribing to our Premium Membership.
-
Similar Topics
-
By Wonderwoman
I am hoping that someone here can give me some more ideas. Our poor old red 300 won't start. We rode it, running fine, shut it off and now it won't start. Have gas to the carb and spark at the plug. Valves are adjusted. Still won't start. Tried a little starting fluid in the air chamber and still won't start. This poor old machine has 7000 miles on it. That has to be an Arctic Cat record! And I have never touched the engine besides setting the valves. Unfortunatly it looks like it only has 60 psi of compression. Don't understand how it could be running fine and then nothing. Someone give me a clue as to what I am missing or what to check. I was going to rebuild the top end this next spring but didn't want to do that this winter in a non-heated garage. Any help?
-
By Sblt80
Lt 80 had new top end rebuild and will not start now,
I have a spark and compression
even tried putting fuel down the barrel but still nothing.
hasn’t even tried to start or back fire since rebuild
can anyone help please
-
By bobg
Had the starter solenoid hang 87 Big Bear while I was riding it. Wrecked the battery. Put a new battery and solenoid in. Wont start with the starter, but will start with the rope and runs great. The fuse is good, but I don’t have any continuity through the circuit breaker. I’m assuming there should be. Can’t find one online, can I replace it with a fuse? Posted a picture of the circuit breaker.
Bob
-
By lporter
Put in new carburetor, battery is good, 30a fuse in starter relay good whe I push start button nothing happens except buzzing sound from batt. All lights come on. Won't start with pull cord either.
-
By Faroe
Hello. I have a Bear Tracker 2002. I have been having problems with spark. Since I have removed the battery and starter relay, it gives spark, ewhen pulling the starter by hand. When I install the battery and starter relay, it gives no spark, even if I pull the starter by hand. However, it will not start with the hand starter Has anyone had the same problem?
-
-
Similar Tagged Content
-
- 31 replies
- 6,313 views
-
- 5 replies
- 2,020 views
-
- 1 reply
- 1,493 views
-
-
Gallery Images
-
Recently Browsing 0 members
- No registered users viewing this page.
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.