Quantcast
Jump to content


1999 polaris xplorer 400 no rear brakes


Recommended Posts

HEY ALL, NEW TO THE SITE..MY POLARIS XPLORER 400 REAR BRAKES WONT WORK...JUST FILLED WITH FLUID BUT STILL NOTHING...I PURCHASED THE QUAD USED RECENTLY AND GOT A DECENT DEAL ON IT... I OPENED UP THE BRAKE FLUID RESEVOIR AND REALIZED IT WAS COMPLETELY EMPTY. WHEN i RODE IT I REALIZED THAT THE FOOT PEDAL HAD ABSOLUTELY NO FUNCTION AT ALL. YOU CAN PUSH IT ALL THE WAY TO THE FLOOR BOARD AND THE QUAD STILL DOESNT EVEN THINK OF SLOWING DOWN. IM THINKING PADS BUT NOT ENTIRLY SURE JUST THOUGHT ID GET ANOTHER OPINION...THANKS IN ADVANCE

Link to comment
Share on other sites

Brakes need to be bled, get a cheap brake bleeder kit from a place like harbor frieght, it will make the process much easier. I made my own vacuum bleeder with a meat injector syringe and a piece of fuel hose. This kit will work well, but I think they have less expensive ones. Or, you could just do it the old fashioned way and pump the brake pedal, hold it and open the bleeder nut, and repeat, over and over and over and over........

Brake Bleeder and Vacuum Pump Kit

Link to comment
Share on other sites

  • 4 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By Spritee1
      having an issue with the unit when running under a load up a hill or in high gear, seems like the belt is slipping, there is a clapping sound coming from the primary clutch like it releases and snaps back in. i don't think I should have a noise like that. this is a friends unit and he has already replaced the primary twice with the same result.
      not sure where to look next
    • By newguy024
      Just got into ATV riding just last week, never had much money so i couldnt afford to buy anthing, so now at the age of 34 i just bought a 1987 suzuki quadrunner 300 for 500$ took it out a few times and what a rush of excitement to go through that first mudhole haha!
    • By Johnfj44
      The stock driver seat cushion is separated at a seam. I took the seat apart and found that the material has torn and cannot be re-stiched. I'm trying to find a replacement seat. Any suggestions? Hoping for a used seat but couldn't find one on Ebay.
    • By Slitzer
      Hi,
      Got a Big Boss produced 2016 YM 2017 that gives DTC 520 285 2 (random)
      What I understand is correlation code for brakesensors, very little information in workshop manual.
      Removed front plastic to discover that no connector was mounted on the brake pressure switch!?
      The only "brake" information seems to come from the micro switch at the brake lever.
      Does anyone know if Polaris does anything special on the 6x6 or had this issue?
    • By NZrider
      My king quad 700 runs rough when cold then won't start some times but not often when it's hot. And occasionally smoke's a lot when it's cold I'm guessing that's rings but I'm worried unless it's causing the other problems
       
       
       
      All help is appreciated thanks
×
×
  • Create New...