Quantcast
Jump to content


05 yfz450 finding title


Recommended Posts

You guys have all been such a great help on all of my old threads but this one i think will be different than any one you've posted on before. When i bought my 05 yfz450 from a buddy of mine, it had no title with it. I have since moved to utah and i am dying to hit the dunes here but, unlike mississippi, you have to register your bike here to ride. So on my journey to do so i found out that i need the title or manufacturers certificate of origin. I found the store that sold the bike but they can't give me the mco because the bike was originally in someone elses name. Has anyone ever been in this position? I need to title the bike in utah to register it here since i now live here so this has become quite labor intensive. Can someone please help me?!! I don't think a bill of sale is enough. Yamaha dealer here told me that i need the title or mco to get it titled. DMV has been closed since friday so i haven't gotten a chance to speak to them about it yet. All advice is welcome. I have a 700 raptor also that i can ride till then but it's just not like my 450:).

Link to comment
Share on other sites

Well, good luck to you, I am sure you now know why it is not such a good idea to buy any type of vehicle without a title. The DMV should be able to help you figure out if it is stolen or not, here in WA, we would need to take it to a State Patrol inspection center, they won't tell you anything about it here if it isn't there for them to confiscate if it does turn out to be stolen. Then they would want to know who you got it from, if you have no one elso to pass the buck to then they may just assume that you stole it. If you want a clear conscience, you should atleast try to ask the DMV if they can tell you weather or not it is stolen, if they can't help you, I am sure they can tell you where to go. If it is anything like it is here, even if it isn't stolen, getting that thing registered in your name could be difficult and time consuming at best. Your best option may be to buy a titled frame off of Ebay and swap everything to the titled frame. As long as the numbers on the motor are clean, you will have a legal machine.

Link to comment
Share on other sites

New quads did not come with a title in OREGON until 2008. Before that, all OHVs, including dirtbikes just didn't have a title. You could register it, but why?

Now titles are provided but ppl still sell used stuff without one since it is not required.

Utah: file for a new title as a resident. Old title was lost/stolen. The DMV can do a nationwide search in a few seconds WHEN they get around to it.

Don't worry about it.

search for Utah DMV- they prob have a site that can answer some of your questions.

if it's like Oregon, BRING MONEY.

:wink:

Link to comment
Share on other sites

well, i found out the bike is not stolen. waiting on mississippi to send me some paperwork that i have to sign and send back to get the title history to the bike. i know who it's registered to but trying to find him has proved to be a challenge. the dmv here told me if i can have it titled in mississippi then i could register it here and that would probably be the easiest thing to do.when i get that paperwork in i'm going to call them and see about starting the process of obtaining a bonded title from back home. it may take 2 or 3 months maybe longer but i'll get it worked out one way or another. i was doing all this so i could sell it and build up my 700 raptor but after all this, i may just keep both of them....lol...thanks guys for the info.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By Suzukiquad
      If you had to choose one mod that you couldn't live without, or had to recommend one what would it be? 
    • By ResQ91
      Hi Guys!

      New member and could really use your advice. I would have to believe this has been an issue for others but a search here came up with nothing......? (Probably me not doing search correctly)
       
      I have an 87 Big Bear 350 YFM350FWT
      The OEM Mikuni BTM carb is shot and would rather replace than rebuild.
      It is no longer made and I have had good luck with NICHE carbs so I ordered a #K-CRB-0006 This was what they said was replacement when ordered. This Carb only uses 1 Throttle cable. The Slide is linked so it uses one. (OEM had 2nd cable coming through top to move slide)
       
      Problem is when I ordered a replacement Cable from NICHE (#C-CBL-0061) the Cable wire is a little short, not allowing Throttle to return all the way down to Idle position. I called NICHE and they are at a loss. Haven't gotten back to me after 2+ weeks.
       
      What would you recommend other than a carb rebuild?
      Can I just use 1 of the OEM cables (It is the right length) and snip/disconnect the other that went to top of Carb for Slide?
      Or ??
       
      Thanks in advance for any advice you have!!
       
      Dave
    • By DarkRider
      This is something I'm extremely curious about. Has anyone ever attempted to buy a quad (or any other vehicle) from an impound lot? I've always wondered if this could be a bargain, or a waste of time. Google searches do turn up some helpful results. Looks like the state of NJ holds auctions online which I'd be a bit hesitant about.
       
      My online searches haven't really turned up any results of anyone buying an ATV this way. I'd be really curious if anyone tried this, or knows someone who has. I've actually found a couple pages with online auctions for my state, but none had ATVs.
    • By luckyyyyesther
      Hey all!
      I'm on a mission to buy my first UTV soundbar as a gift for my dad(a newbie on ATV). I'm aiming for something that offers great sound quality without breaking the bank – my budget is around $250. Right now, I'm considering options like ecoxgear, kemimoto, and boss.
      Does anyone have experience with these brands or specific models that you'd recommend? Any advice or suggestions would be super appreciated!



    • By Fish0rDie
      Well yall, it's been a while. Work has absolutely annihilated me for the past 5-6 months, and ive had bare minimum time to work on this project. Thank you to those that helped previously during the engine rebuild, but now were on to the task of wiring, and let me tell you besides the plugs on the wiring, I am almost completely lost. Bought an ebay harness, and none of the colors line up to what i have seen on any manuals. Its all the 97-01 electronics i believe. Ill post some pictures below of the mess I'm working with. Emphasis on "mess." A lot of the wires had to be extended since the harness was made for an atv and not a buggy. The colors are a little wonky, but I was using what I had, and they were mostly for just extending the plugs, so the colors match on either end. A buddy of mine has been helping me, and we are just at a loss. Looking for general guidance or any wire specific help you could give us. Not even sure if some of the single wires are plugged in right, and we dont have a "lever switch" wondering if thats just for the brake, because the master cylinder has two screws. I suppose a + and -... We also have what I believe are the reverse and neutral sensors to plug in (the only two sensors on the engine)
      P.S. peep the custom airbox i 3d printed to utilize a lawn mower filter and 2x2 coupling from lowes 
      If you need better pictures of anything, let me know, It's kind of hard to get pictures of this rats nest.
      Wires that are not connected to anything
      4th picture black wire
      5th picture blue wire w white stripe left/solid blue on right
      6th picture what I believe to be the lever switch from pictures I saw on ebay
      7th picture is two black wires coming out of the harness. One we have running back to a black with white stripe that comes out of a different place in the harness. The other that had an end to match the single wire coming from the handle bar switch. Single handle bar wire has a white stripe, so I may try to switch those around if the ends permit it.
      I know it just looks god awful, but i really do think we are close, and the idea is to figure out whats going where, then figure out how to make it look better, so bear with me haha. Any help is appreciated. Just finished a little go kart for my wife with a predator 212, and gosh do I envy that wiring (there is none😂)
       












×
×
  • Create New...