Quantcast
Jump to content

Recommended Posts

Posted

My girlfriend wrecked it a while ago and I replaced a lot of parts on the front left side but the front left tire still tilts inwards a little I think the frame is bent???!!!! Any suggestions on what to do??? thank you Greg.

Posted

set it on level ground Greg and get out the tape measure. compare side to side and you'll soon see the source of your problem. Sounds like something is still bent...

Posted

How and where is it bent, post a picture. I fixed a bent frame problem on my LT-R by cutting off the a-arm mount and moving it out so it would line up with the other mounts and straighten my a-arm back out. Alot of things can be fixed by cutting and welding. I realize this isn't an option for everyone, but if you have the recources, or know someone who can fab metal, you might be able to get out of this one a little cheaper than you think.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By HHurks
      Yesterday I got a UForce 1000 as my first bike and I am wondering if there are any owners that could advise where I can find budget parts and accessories for it.
      I tried looking StarknightMT, but the filtering is a bit unreliable, so direct links or exact names are much appreciated.
      I'm mostly interested in sliders and side cases, but any advices for "must haves" are welcomed.
      Thank you!
    • By HoldenBoy
      Hi all,
      Looking for some help on a starter/bendix issue. Can Am outlander 450 2017. While cranking to start, the starter spins and engages into the ring gear. After a few seconds the bendix retracts while still spinning and there is no damaged teeth on the drive pulley.
    • By TomJulio
      Looking for two stock front wheels for 92 TRX300 2WD.   I think they are 6 x11" size.     
    • By toe420
      Hello everyone, I have a 92 honda trx350 I just picked up that has a bent section of the frame where the rear of the seat would clip into place. It almost looks like a tree or something heavy fell on it. Its a fairly deep bend, if that makes sense. It like a V instead of straight. What are peoples goto methods for straightening a section like that? 
    • By TomJulio
      I recently noticed my Fourtrax 2WD has 4WD wheels installed on the front.  The back spacing is significantly different than 2WD wheels and they are almost touching the strut springs and the tires actually do touch the springs..   So far, no luck locating 2WD wheels to correct this issue. 
×
×
  • Create New...