Quantcast
Jump to content

Recommended Posts

Posted

Hello, I am new to quadcrazy looking for help with a 2003 250 Bayou I just bought. It has no fire. When I switch it on I have no netural light or any light. The battery is fine and the starter turns fine. No fire at plug. however when I kick start or use the elactric starter the netural light lightes breifly. I dont have a service manual. So I dont know where any fuses might be located. Does anyone know a site to download a pdf manual? I have gone online and found free pdf manuals for foy two Honda four trax. Thanks any on that can tell where to start of how to check the fire. Thanks Mike

Posted

I would try changing the plug because it can cometimes be a bad plug and then see if the plug sparks to a ground when you try to start it. There may be a problem with the neural switch and that may also keep it from starting depending on the year. You might be able to adjust the linkage to get the nutural light to turn on. Newer models will start in gear if the brake is locked but it may be a bit too old for that.

Posted

Yeah, try holding down the hand brake and see if it starts. I used to have a 2002 Kawasaki Bayou and I believe you could do that.

* Added manufacturer and issue into thread title.

Posted

Hello Thanks for your respones. The starter will not turn the motor over from the starter button. When I switch on the key I get nor netural light at all. I can take a screwdriver and make the starter turn the motor by jumping the starter relay. Wher I do this the nutural light will light while the motor is trying to start. However I have no fire at the plug. . Where is the nutural switch? I have been told there may not fire due to the CDI. Thanks to anyone who can futher give me some advice.

  • 2 years later...
Posted (edited)

first, I new to site, I need to ask same questions. Not sure where to oust mechanical question my 250 bayou will not start. first the electrical switch start would not start the bayou, now pull wont. changed plugs. last start was pull off start with truck. now no start am I am not strong enough to pull start anymore. when I hold down compression lock the engine turns ok, I have bought new battery, plug. air filter, when I push start switch I do get the solenoid to click, and I cave good compression kick back from engine it seems, any help is appreciated.

Edited by grandpa

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Popular Now

  • Similar Forum Topics

    • By realpilot
      I am unable to find a wiring diagram for this UTV.  When I turn the switch to on, the contractor does not engage.  The Brake pressure switch and the parking brake switches work correctly. What else should I be looking for?  All of the diagrams I have found are for newer models and the wire color coding is different.
       
      Thanks
    • By mehim
      Hi everyone and thanks for reading. 
      My husband and me are getting ready to host the 2nd Quad Runners event at our nudist campground. The first one (last year) went pretty well with about 20 quads attending and have to say, it was a smaller group, but they made up for their size with the large interest in partying and there was plenty of nudity as the Saturday night went on. 
      We have decided to host another one this summer, but we are looking for some fun (but safe) riding events. Our grounds are almost all flat and remember we are a nudist campground so many of us are bare as* naked so "slow ride" events would be the best. 
      Give us your thoughts and ideas and feel free to ask us anything you would like, and we will answer right here in the thread. 
      Thanks for your help and ride safe. 
      BTW, let us know what "anything goes" means for this thread section. 

    • By logray
      Hi all, 

      I am wondering if any of you have a Clutch Starter gear from a 1988 era quadrunner 250 sitting around that you could get me a precise measurement of the outer diameter of the race the sprag engages onto, for me? I need to machine a damaged race down and install a hardened sleeve and need that measurement (it's on a different gear than the OEM one, so I can't buy and use a OEM gear). 

    • By OldATVowner
      Just getting into this issue really. Been replacing solenoids but now I'd like to track down the problem. This time I'm not getting neutral/reverse lights or start button. Was on a creek ride when it started doing this recently. It cranks by arcing the solenoid and gives me no light or start button but if I crank with the pull cord....the neutral light and the button work. Turn it off and try to crank with the key and nothing. I'm looking into the safety switch issue tomorrow and re charging the battery. Just figured this was odd enough of a problem that you guys might be familiar. Thanks
    • By quadcrazy
      If you are a new member, why not introduce yourself? This community thrives and grows with you and all our current members! We all want this community to grow and encourage new member registrations. That being said please help out QuadCRAZY by inviting other atv'ers to the community.
      QUADCRAZY NEEDS YOU!
×
×
  • Create New...