Quantcast
Jump to content

Recommended Posts

Posted

Hello, I am new to quadcrazy looking for help with a 2003 250 Bayou I just bought. It has no fire. When I switch it on I have no netural light or any light. The battery is fine and the starter turns fine. No fire at plug. however when I kick start or use the elactric starter the netural light lightes breifly. I dont have a service manual. So I dont know where any fuses might be located. Does anyone know a site to download a pdf manual? I have gone online and found free pdf manuals for foy two Honda four trax. Thanks any on that can tell where to start of how to check the fire. Thanks Mike

Posted

I would try changing the plug because it can cometimes be a bad plug and then see if the plug sparks to a ground when you try to start it. There may be a problem with the neural switch and that may also keep it from starting depending on the year. You might be able to adjust the linkage to get the nutural light to turn on. Newer models will start in gear if the brake is locked but it may be a bit too old for that.

Posted

Yeah, try holding down the hand brake and see if it starts. I used to have a 2002 Kawasaki Bayou and I believe you could do that.

* Added manufacturer and issue into thread title.

Posted

Hello Thanks for your respones. The starter will not turn the motor over from the starter button. When I switch on the key I get nor netural light at all. I can take a screwdriver and make the starter turn the motor by jumping the starter relay. Wher I do this the nutural light will light while the motor is trying to start. However I have no fire at the plug. . Where is the nutural switch? I have been told there may not fire due to the CDI. Thanks to anyone who can futher give me some advice.

  • 2 years later...
Posted (edited)

first, I new to site, I need to ask same questions. Not sure where to oust mechanical question my 250 bayou will not start. first the electrical switch start would not start the bayou, now pull wont. changed plugs. last start was pull off start with truck. now no start am I am not strong enough to pull start anymore. when I hold down compression lock the engine turns ok, I have bought new battery, plug. air filter, when I push start switch I do get the solenoid to click, and I cave good compression kick back from engine it seems, any help is appreciated.

Edited by grandpa

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By Rockbottom
      2008 400 big bear was running now will not start
      have power to relay, in neutral, press start have power to starter but nothing happens starter does not turn
      i have good ground at battery to frame and added ground from wire harness to frame beside batter/ frame ground
      blue white wire to cdi has power with key on
      I believe the neutral lock out is working since is was before i shut it down
      if i put  it in gear and hit the start button with key on the relay does not click or send power the starter
      The 3 wires at the relay have power with key on
      What should i test next?
      thanks ahead
    • By Mister907
      Hi guys, I have a 2004 big bear 400. Last winter while plowing the driveway, I heard a loud pop from the left side of the engine. It continued to run as I looked for leaky fluid, but then died shortly after backing it up and won’t start now. The oil light comes on when I try to start it, no noise or anything else. 
      No blown fuses that I can find.
    • By LMI
      Hi all.  New to the forum & quads.  Seems like a great place full of info.
      I just recently picked up a 2005 Suzuki KingQuad LTA700.  I need a battery.  I've been reading up on conventional vs AGM types.  I have a Royal Distributing and Canadian Tire.  RD has 2 types avail for my year/Model a battery YTX16-BS CRANK $75, and BATTERY YTX20CH-BS YUASA $140.  Neither of these is the type from the manual FTZ16-BS.
      from what I can tell... I think the only difference is the capacity with the $75 unit rated at 14 AH/10HR and the $140 unit rated at 18 AH/10HR ... which is the rating in the manual for the FTZ16-BS.  How much does this make a difference for nearly x2 the cost?
      And about the models/type numbers.... what is important to know ... they all end in "-BS" but are the other details relevant or just manufacturer naming?
    • By HoldenBoy
      Hi all,
      Looking for some help on a starter/bendix issue. Can Am outlander 450 2017. While cranking to start, the starter spins and engages into the ring gear. After a few seconds the bendix retracts while still spinning and there is no damaged teeth on the drive pulley.
    • By Brent Wright
      What's a good size to start a 10 year old on?
×
×
  • Create New...