Quantcast
Jump to content

Recommended Posts

Posted

Hey guys i been wanting to get some more mods done to my 03 400EX. Right now i have the big gun exhaust, UNI intake, and DynoJet jetkit. Been looking around for some mods to do but not sure what exactly to get..Kinda thinking either suspension mods or motor mods to get a lil more speed out of it.Any suggestions?

Thanks!

Posted

Depends... If you ride in smooth places where you dont use suspension then go for motor work, but if you go over any bumps at all the 400ex's suspension desperately needs upgrading so i would do that..

Posted

Well you may want to make it wider with a-arms and an axle, although if you ride on tight trails that wouldn't be a good idea so that depends on what you do.

And then you can ether get some 450r shocks which will fit from what i have heard with just slight modification, and then get the 450r shocks and the stock rear shock re built and re valved buy a suspension company

Or you could go with afermarket shocks like fox, motowoz, axis, ect but not elka, most people will tell you that elkas aren't that great and i would agree with them..

Posted

But it all reality PEP, motowoz, Axis and Fox will probably all be about the same and you most likely wont be able to tell much of a difference between them if you compared them..

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By marlon smith
      1990 kawasaki bayou 300c idles fine but pops out exhaust and intake when trying to excel, will not take throttle past 1/4 , any one had this problem?
      have replaced carb twice, same thing, fresh built engine cylinder head, same as before, new spark plug, flywheel key is good, pulser test good, good spark
    • By BillR94
      I picked up this ATV that had no spark. The previous owner said he was driving it and it died and would not start. He discovered it had no spark. He replaced the CDI and the coil with no luck. He got tired of it and I bought it. I replaced the stater and now it has strong spark. Now, it starts for a second or two then dies. It will not stay running. I have checked the timing and it is spot on. The valves are adjusted correctly. I see no warn issues with the cam. I put the original CDI and coil back on it. Same problem exists. Compression is at 65 psi (has decompression mechanism),
      I took off the muffler in case the issue was clogged pipes. No change. I replaced the spark plug. No change. The carb was an aftermarket so I put a Niche carb on with no change. I bypassed the fuel pump and that did nothing to solve the problem. 
      I don't know if this is a carb issue or an ignition issue. I am looking around locally for an OEM carb to try out but not sure that will fix the problem. 
      Can anyone help me solve this problem. I am running out of ideas. 
      Thank you for your time
      Bill
       
    • By johnboer
      I've been tryna find a replacement intake manifold for my 85 LT250EF because it's all hardened up but i can't seem to find one. Are there any other manifolds that would fit this model. Or how should i soften this manifold. I saw that wintergreen oil would help to soften it up but i wouldn't know how long it would last. Any other tips on how to get a tight seal around the engine intake would be appreciated.
    • By 95kingQuad
      As the title says I am on the search for a used OEM 1995 King Quad Carb. I believe it says Mikuni on the side. If you could even help me find info on which carb it is exactly that would be helpful too, or motorcycles/other quads that use the same carb. Thanks!
    • By goatman
      quad is a new to me freebie, pulled carb and cleaned it. got it running and idling nice but mid throttle it craps out and will go down to almost a stall, i release throttle and it just sits there idling away happy as a pig in poop. i was thinking fuel restriction then i noticed the exhaust glowing red in the sunlight. so its running lean
×
×
  • Create New...