Quantcast
Jump to content

Well wish me luck

hangingon
 Share

Recommended Posts

hangingon Grand Master

hangingon

Posted
Posted

I'm going to the shop where I bought my prairie. I hope things go good because I have had it. The bull crap reason's for the seller to not have my front bumper for my quad. It's demand time. Being nice is going out the window. If I don't come home with a front bumper in the morning I will be taking legal action. He sells using craigs list and reviews can hurt.

hangingon Grand Master

hangingon

Posted
  • Author
Posted

Luck was not on my side today. Now it ended up being the bumper seller that did not go good. I picked up the money went to get the bumper and now he can't find the lower part of the bumper. I'm not to bright sometimes but I was today I returned the money to the shop owner. aHe said just keep it I said no our deal is for a bumper not money. So I don't 50.00 from him and have to put more with it. He owes me bumper not a payoff.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Popular Now

  • Similar Forum Topics

    • TomJulio
      Wanted- Honda TRX300 front wheels -2WD
      By TomJulio
      Looking for two stock front wheels for 92 TRX300 2WD.   I think they are 6 x11" size.     
    • TomJulio
      1992 Honda TRX300 front wheels
      By TomJulio
      I recently noticed my Fourtrax 2WD has 4WD wheels installed on the front.  The back spacing is significantly different than 2WD wheels and they are almost touching the strut springs and the tires actually do touch the springs..   So far, no luck locating 2WD wheels to correct this issue. 
    • Olchap
      1989 Yamaha big bear 350 front brake cylinders
      By Olchap
      Hi, I am new to this forum I am currently working on my 1989 Yamaha front end.  The cv axles were bad so I changed them on both sides with all new wheel bearings. Now I'm looking at the front brakes and the 2 cylinders for the brake shoes on both sides do not work at all. I am also new at working on brakes so its a mystery to me what needs to be done to fix the cylinders.  Can somebody please help me with these brake issues? See the image below.
      Thank you,
      Olchap

    • HighPlainsIT
      2003 Prairie 360 Won't Start
      By HighPlainsIT
      My son's trying to get a 2003 Prairie 360 running. Over a year ago, he'd rebuilt the carburetor using a SHINDY 03-112 rebuild kit from JT Cycle & ATV, and it was working fine; however, when it wouldn't run recently, he took the carb apart and the jet needle was rusted in place. He cleaned that up as good as possible and replaced the jet needle with the old one that wasn't rusty. Now, he can only get it to start about 1 out of 5 tries, and when it does start, it won't run unless the choke's on. The spark plug's good and is sparking. It has compression. Any ideas on what he should try next or look into?
    • Autokill83
      1988 Yamaha Big Bear 350 ATV - bumper swap fitment from 93
      By Autokill83
      Good Day, just bought a 1988 Big Bear 350 and am missing the bumper - will a bumper from a 93 with the holes in the front fit up directly? Please see the attached pictures of the bumper for reference.  any assistance would be appreciated. Thanx !





COMMUNITY SECTIONS

ATV FORUMS

QUADCRAZY MEMBERSHIP

Be a part of best online community of ATV riders and join thousands of people who love ATVs! Share your ATV photos, videos, ATV rides, get help with your ATV and more. Not a member?

SIGN UP TODAY

ADVERTISE WITH US

FOLLOW US ON

  • Automotive Webmaster
×
×
  • Create New...