Quantcast
Jump to content


95 Polaris 400 Overheating issues


Pcc4life

Recommended Posts

I HAVE A 95 POLARIS 400 BIG BOSS AND I OVERHETAE DTHE MOTOR ABOUT 750 MILES AGO AND SO I DID THE TOP END KIT NEW PISTON BORED ONE SIZE OVER 0.010 FROM STOCK SLOWLY BROKE MOTOR IN AND I ONLY USE THIS QUAD FOR HUNTING SO IT DOESN'T GET BEAT ON BUT I WAS OUT HUNTING SEP. LONG WEEKEND AND THE LAST DAY HUNTING I LEFT IT RUNNING AND CAME BACK AND IT WAS SMIKING LIKE A BANSHEE. THAT WAS THE LAST TIME I RODE IT TILL TWO WEEKS AGO AND WENT HUN TING AGAIN AND DTHE COMPRESSION DIDNT SEEM RIGHT AND WAS SMOKING A LOT THE OVER HEAT LIGHT DOESN'T WORK THE SECOND DAY HUNTING I VE BEEN DRIVING FOR ABOUT 4 HOURS THE ENGINE GAVE OUT ON ME THE PISTON MELTED ON THE EXHAUST SIDE AND I BLOW A HOLE INTO THE WATER JACKET ANY SUGGESTIONS i KNOW I WILL NEED TWO RE SLEEVE AND NEW TOP END KIT BUT I DONT WANT THIS TO HAPPEN AGAIN

Link to comment
Share on other sites

Since you said about the water jacket I take it's water cooled. You need to get the cooling fixed & like swampcat said the temp gauge. Did water mix in the oil pull the dip stick and check for white spots. If you do have water in the oil you could have a head or head gasket problem and it will cause smokeing & over heating. If it looks good make sure the fan is working, thermostat is opening and letting the coolent circulate. Hope you get it fixed soon.

Link to comment
Share on other sites

With water cooled I have had problems with air in the hoses preventing the coolant from circulating. To check this I make sure the hoses are warm to the touch and that the fan cycles on and off. If not, to "burp" it I elevate the quad on car ramps and run till warm with the radiator cap off and under no pressure. Also you may look into replacing the cap it is cheap insurance to make sure you are running under the correct operating pressure.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Forum Topics

    • By Mikey69
      Heres my story. Kinda long. I guess I was a late bloomer when it comes to quads. I had never ridden a quad in my life. Rode Dirt Bikes as a kid growing up. Back in Oct of '06 I found a Mustang on craigslist. Took it for a test drive one morning before work. Fast car. 351 Cleveland. I had planned on meeting the guy again after work. For some strange reason thats still to this day beyond me, I stopped in Hillsboro MotoSports on the way home from work. I had 6 Grand on me. There was a left over '05 sitting by the front door. It was on sale for $4999. It was $5499 OTD. I didnt even look at anything else. I knew nothing about quads accept I thought it really looked coool and I had the money in my pocket to buy it. I was sitting on it when the salesman walked up and asked... "Can I help you?" Without hestitation I pulled 60 Ben Franklins outta my front pocket and said "I want this Quad. Load it up in my truck." It was just about dark by the time I drove away from the shop. BTW, I didnt bother to ask my ol lady if I could buy it. LOL. Anyway, I took it by the house and showed her. She was kinda stunned but not mad. We drove over to a friend of mines house and unloaded it. I took it to the field across the street from his house. HOLY CHIT!!!!! I was surprised by the power. I had it for about 2 weeks and took it to Sand Lake. I was there a few hours and rolled it on a banked turn at the top of the bowl right before you get to the one-ways. When it rolled, I flew off and landed on my belly. The quad came bouncing and landed on my back. For a month I couldnt even walk. I was scared of it. I considered trading it for a 250EX. Went back to the shop. The salesman said..."Dude!!! You dont want a 250EX!!! Trust me. Just get used to it" I still wasnt convinced. I put it on craigslist for $4000. Calls were coming in. I had a guy that wanted to come look at it that evening. I decided to take it for one last ride at Browns Camp before I sold it. I was still afraid of it. After about 5 minutes I started feeling comfortable on it again. I decided right then, I loved my Honda 450 and would learn how to ride it instead of selling it. That was late Nov of '06. Work was slow for a Painter in Oregon. My new job everyday? Going to Browns Camp and ridding my Quad. I bought my Girl Friend an '02 Blaster. I rode my 450 for 4-6 hours almost every single day for 3 months. And yes, I know my way around Browns Camp pretty well. LOL. In March I bought her an '06 TRX250EX (Thank God I didnt trade my 450 for one of those) LOL Since then, I have become totally addicted to quads. I love them. Couldnt imagine not owning at least one quad. Luckily I have two. My "07 was $6500 OTD in July of '07. Bought it for my Girlfriend. Traded in her 250 EX. A month later we broke up. So, I wound up with two Honda 450's.
       
    • By Spritee1
      having an issue with the unit when running under a load up a hill or in high gear, seems like the belt is slipping, there is a clapping sound coming from the primary clutch like it releases and snaps back in. i don't think I should have a noise like that. this is a friends unit and he has already replaced the primary twice with the same result.
      not sure where to look next
    • By newguy024
      Just got into ATV riding just last week, never had much money so i couldnt afford to buy anthing, so now at the age of 34 i just bought a 1987 suzuki quadrunner 300 for 500$ took it out a few times and what a rush of excitement to go through that first mudhole haha!
    • By HSTAR
      Hey I have a 1997 big bear 350 4x4
      I replaced the shifter shaft and the shift arm linkage and the rod when I installed them all I was unaware that you had to line the dot on the shifter shaft with the gap on the linkage arm gap put it all back  together and rode it I can't get it to shift in the right gears  I can move the shift cam by hand and goes in different gears but with the shifter shaft in it riding I can't put it in R or N 
      Anyone know how to line up the shifter shaft and the shift cam s
       
    • By ResQ91
      Hi guys
      My 87 Bear 350 won't start and could use a hand.
      Turn key on and Oil light turns on and then slowly fades out. (I think this is key to this) No start, not even a tick.
      battery and connections good
      A Solenoid post jump turns it over
      Neutral Safety Switch wire attached and seems good
      It has not had a wire/switch on Rear Brake Pedal ever since I had it.
      Any thoughts on some other things to troubleshoot this??
×
×
  • Create New...